Thermador Oven Error E014
⚡ Quick Answer: The Thermador oven error E014 indicates a malfunction with the oven's temperature sensor, leading to erratic temperature readings and unresponsive con... ✅ DIY Fixable
What Does Error E014 Mean?
The Thermador oven error E014 indicates a malfunction with the oven's temperature sensor, leading to erratic temperature readings and unresponsive controls. This can manifest as the On/Off key on the touch control panel not responding, along with other control buttons potentially being unresponsive. Causes may include moisture or contamination on the panel, a loose or damaged wire harness, a faulty user interface, or a defective electronic oven control board.
Common Symptoms:
- Error E014 displayed on oven control panel
- On/Off key on touch control does not respond
- None of the control buttons respond in some cases
Possible Causes
- Unresponsive On/Off touch key due to contamination or moisture on control panel (medium)
- Loose or damaged wire harness between user interface and control board (medium)
- Faulty user interface (touch control panel) (medium)
- Faulty electronic oven control board (low)
How to Fix Error E014
DIY Fix Clean and dry the touch control panel
- Disconnect the oven’s electrical power (unplug or switch off circuit breaker).
- Use a soft, dry cloth to clean the glass touch panel, especially around the On/Off key.
- Ensure the panel is fully dry before restoring power.
DIY Fix Power cycle the oven
- Turn off the oven at the circuit breaker or unplug it.
- Wait at least 60 seconds.
- Restore power and test the On/Off key.
Technician Only Inspect and repair/replace internal wiring and components
- Disconnect power and remove the oven control panel to access the wire harness.
- Inspect the wire harness between the user interface and electronic oven control board for damage or loose connections; repair or replace as needed.
- If wiring is intact, replace the user interface control panel.
- If the issue persists after replacing the interface, test and potentially replace the electronic oven control board.
Parts needed: Wire harness between user interface and control board, User interface (touch control panel), Electronic oven control board
- If error E014 persists after cleaning, power cycling, and basic visual inspection of connections
- If internal components like the wire harness or control board need inspection or replacement
Next step
Choose the next step for E014
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Oven Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | Thermador 00415066 |
| voltage_rating | 120V AC |
Common Questions
What does E014 error mean on thermador oven?
E014 indicates a malfunction in the temperature sensor, causing unresponsive controls and erratic temperature readings.
Can I fix thermador oven E014 error myself?
Yes, you can clean the control panel and power cycle the oven as initial troubleshooting steps.
How much does it cost to fix E014 error?
Repair costs can vary but are generally moderate to high depending on parts and service in your area.
When should I call a technician for E014?
Call a technician if the error persists after basic troubleshooting or if internal components need inspection.
Sources & References
- Error Codes | Ovens Support | Thermador (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!