Thermador Oven Error E012

⚡ Quick Answer: The Thermador oven error E012 indicates a malfunction in the temperature sensor or control electronics, leading to erratic temperature readings or the... ✅ DIY Fixable

What Does Error E012 Mean?

The Thermador oven error E012 indicates a malfunction in the temperature sensor or control electronics, leading to erratic temperature readings or the oven failing to heat properly. This may also cause the oven to stop cooking cycles and emit beeping sounds.

Common Symptoms:

  • Error code E012 displayed on oven control panel
  • Oven may stop heating or refuse to start cooking cycles
  • Possible beeping accompanying the error

Possible Causes

  • Defective electronic control board temperature sensor (medium)

How to Fix Error E012

DIY Fix Basic checks and reset

  1. Press any key (e.g., TIMERS) to stop beeping if present.
  2. Turn off power to the oven at the circuit breaker or unplug for at least 60 seconds, then restore power.
  3. Observe if E012 recurs when attempting normal operation.

Technician Only Inspect and replace the temperature sensor or control board

  1. Disconnect power to the oven.
  2. Access the oven’s internal control electronics and temperature sensor components.
  3. Use a multimeter to test the temperature sensor for proper resistance at room temperature.
  4. If the sensor is out of specification, replace the temperature sensor.
  5. If sensor tests good but error persists, test/inspect the control board for faults and replace as needed.

Parts needed: Temperature sensor/thermistor, Electronic control board

🛑 When to Call a Pro:
  • If the error persists after reset and basic checks
  • If testing shows sensor and control board anomalies
  • If internal inspection reveals wiring damage or burnt components

Next step

Choose the next step for E012

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

$15 - $35 · Easy · 15-30 mins

Check fit & price
Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price
Model number required

Model-compatible Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply
Diagnostic tool

Oven Thermometer

A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage
component Temperature Sensor
resistance 1000-1200 ohms
part_number T30-100
voltage_rating 120V AC

Common Questions

What does E012 error mean on Thermador oven?

E012 indicates a temperature sensor malfunction, causing erratic readings or heating issues.

Can I fix Thermador oven E012 error myself?

Yes, try resetting the oven and checking the power supply before calling a technician.

How much does it cost to fix E012 error?

Repair costs vary; sensor parts typically range from $20-$70, while control boards can exceed $200.

When should I call a technician for E012?

Call a technician if the error persists after a reset or if there are signs of component damage.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318