Thermador Oven Error E010

⚡ Quick Answer: The Thermador oven error E010 indicates a malfunction related to the user interface memory or its communication with the control board. Symptoms inclu... ✅ DIY Fixable

What Does Error E010 Mean?

The Thermador oven error E010 indicates a malfunction related to the user interface memory or its communication with the control board. Symptoms include the error code appearing on the display, beeping sounds, and unresponsive touch controls, which can lead to the oven not functioning normally. Possible causes include a loose or damaged wire harness, a failed user interface module, or less commonly, an electronic oven control board fault.

Common Symptoms:

  • Error code E010 appears on the oven display
  • Oven may beep when the error is displayed
  • Possible unresponsive touch controls or control panel
  • Oven may not function normally until resolved

Possible Causes

  • User interface memory or communication fault (medium)
  • Loose or damaged wire harness between user interface and control board (medium)
  • Failed user interface module (medium)
  • Electronic oven control board fault (less common) (medium)

How to Fix Error E010

DIY Fix Basic reset and check display buttons

  1. Press any key (e.g., TIMERS) to stop beeping and see if the code clears.
  2. Turn off the oven and wait several minutes before turning it on again.
  3. If equipped with a 'Clear/Off' button, press and hold it for ~10 seconds as a soft reset.

Technician Only Inspect and repair internal connections and modules

  1. Disconnect electrical power to the oven at the breaker.
  2. Remove the user interface panel and inspect wire harness connections between the interface and control board for loose or damaged wiring.
  3. Reconnect or replace any damaged harness wires.
  4. If wiring is intact, replace the user interface module.
  5. If the error persists after interface replacement, replace the electronic oven control board.

Parts needed: Wire harness between user interface and control board, User interface module, Electronic oven control board

🛑 When to Call a Pro:
  • If the error persists after a basic reset and the controls remain unresponsive
  • If opening the oven cabinet or inspecting internal wiring is required
  • If the oven exhibits additional error codes or electrical behavior beyond E010

Technical Specifications

wattage
component Temperature Sensor
resistance 10-15 kΩ
part_number 00430067
voltage_rating 120V AC

Common Questions

What does E010 error mean on Thermador oven?

E010 indicates a user interface memory error affecting communication with the control board.

Can I fix Thermador oven E010 error myself?

Yes, try a basic reset by pressing any button or turning off the oven for a few minutes.

How much does it cost to fix E010 error?

Repair costs range from medium to high, depending on parts needed and labor.

When should I call a technician for E010?

Call a technician if the error persists after a reset or if you need to inspect internal wiring.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!