Thermador Induction Hob Error SENSOR-LOSS
⚡ Quick Answer: The Thermador induction hob SENSOR-LOSS error indicates a failure in the sensor connection, resulting in an unresponsive display and cooking zones. Th... ⚠️ Difficulty Varies
What Does Error SENSOR-LOSS Mean?
The Thermador induction hob SENSOR-LOSS error indicates a failure in the sensor connection, resulting in an unresponsive display and cooking zones. This error often occurs when the wireless cooking sensor loses its connection or cannot communicate with the induction hob. Common symptoms include a flashing display and disabled sensor-related functions, such as wireless temperature control. Addressing this issue typically involves checking the sensor's battery or resetting the sensor function.
Common Symptoms:
- Error appears on display indicating loss of sensor connection
- Cooking zones may not respond with the associated sensor feature active
- Sensor‑related functionality (e.g., temperature control via wireless sensor) may be disabled
Possible Causes
- Wireless cooking sensor connection lost (medium)
- Wireless sensor battery low or faulty (medium)
How to Fix Error SENSOR-LOSS
DIY Fix Deactivate/Reactivate Sensor or Replace Sensor Battery
- Deactivate the wireless cooking sensor function via the cooktop controls.
- Replace the sensor’s 3V CR2032 battery if applicable.
- Reactivate the cooking sensor and observe if the error persists.
Technician Only Inspect Sensor and Sensor Communication Circuitry
- Disconnect power to the induction hob at the breaker.
- Inspect the wireless cooking sensor and its receiver module for proper seating, damage, or corrosion.
- Check the wiring harness and connectors between the sensor interface and main control board.
- Test or replace the wireless cooking sensor module if necessary.
Parts needed: Wireless cooking sensor, Sensor interface/receiver module, Connector harness
- If replacing the battery and resetting the sensor does not clear the error
- If the sensor or connector shows damage
- If the induction hob displays additional fault codes or behaves erratically despite basic troubleshooting
Next step
Choose the next step for SENSOR-LOSS
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Browse by model — no specific failed part is claimed
Model-compatible Induction Hob parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does SENSOR-LOSS error mean on Thermador induction hob?
It indicates a failure in the sensor connection, causing a flashing display and unresponsive cooking zones.
Can I fix Thermador induction hob SENSOR-LOSS error myself?
Yes, you can try deactivating the sensor, replacing the battery, and reactivating it.
How much does it cost to fix SENSOR-LOSS error?
The estimated repair cost ranges from $50 to $250, depending on the parts replaced.
When should I call a technician for SENSOR-LOSS?
Call a technician if replacing the battery and resetting the sensor doesn't resolve the issue.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!