Thermador Induction Hob Error SENSOR-FAULTY
⚡ Quick Answer: The Thermador induction hob SENSOR-FAULTY error indicates a malfunction in the temperature or communication sensor, leading to erratic cooking perform... ✅ DIY Fixable
What Does Error SENSOR-FAULTY Mean?
The Thermador induction hob SENSOR-FAULTY error indicates a malfunction in the temperature or communication sensor, leading to erratic cooking performance or an unresponsive control panel. This error may occur during operation or at startup, preventing the cooktop from heating properly.
Common Symptoms:
- Cooktop displays a sensor-related error and may not heat or operate normally
- Error appears during operation or at startup
Possible Causes
- Internal sensor failure (temperature or communication sensor) (medium)
How to Fix Error SENSOR-FAULTY
DIY Fix Basic checks and reset
- Turn cooktop off and disconnect power at breaker or unplug (if applicable)
- Wait ~5 minutes then reconnect power to see if error clears (power reset)
- Ensure cookware is appropriate and placed correctly
Technician Only Inspect and test internal sensors and wiring
- Disconnect power and access induction cooktop internals per service manual
- Inspect sensor harnesses and connectors for damage or loose connections
- Test temperature and internal sensors using multimeter or diagnostic tools
- Replace any faulty sensor components or associated wiring
- Verify correct operation after reassembly
Parts needed: Temperature sensor assembly, Wiring harnesses, Control/sensor modules
- Error persists after reset
- Unusual noises, sparks, or odors
- Visible damage to cooktop surface or controls
Next step
Choose the next step for SENSOR-FAULTY
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Induction Hob parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does SENSOR-FAULTY error mean on Thermador induction hob?
It signifies a malfunction in the temperature or communication sensor, affecting heating and control.
Can I fix Thermador induction hob SENSOR-FAULTY error myself?
Yes, try turning off the cooktop and resetting the power to see if the error clears.
How much does it cost to fix SENSOR-FAULTY error?
Repair costs typically range from $150 to $500+ depending on parts and labor.
When should I call a technician for SENSOR-FAULTY?
Call if the error persists after a reset, or if you notice unusual noises, sparks, or visible damage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!