Thermador Dishwasher Error E6002
⚡ Quick Answer: The Thermador dishwasher error E6002 indicates a blockage in the heat pump, which can lead to the dishwasher stopping mid-cycle and reduced wash perfo... ✅ DIY Fixable
What Does Error E6002 Mean?
The Thermador dishwasher error E6002 indicates a blockage in the heat pump, which can lead to the dishwasher stopping mid-cycle and reduced wash performance. This issue may also produce unusual sounds during operation if the pump is obstructed. Addressing this blockage is crucial for restoring proper function.
Common Symptoms:
- Dishwasher stops mid‑cycle with E6002 displayed
- Potential reduced wash performance due to heat pump obstruction
Possible Causes
- Blocked heat pump (high)
How to Fix Error E6002
DIY Fix Power cycle the dishwasher
- Turn off the dishwasher at the circuit breaker or unplug it.
- Wait 30 seconds.
- Restore power and restart the dishwasher to see if the error clears.
Technician Only Inspect and clear heat pump obstruction
- Disconnect power to the dishwasher.
- Access the heat pump area.
- Check for debris, blockages, or impediments in the heat pump flow path.
- Clean or clear any obstruction found.
- Test the dishwasher to confirm resolution.
Parts needed: heat pump assembly, filters around heat pump
- If power cycling does not clear the error after one attempt.
- If obstruction cannot be safely accessed or cleared.
- If there are signs of water leakage near the heat pump area.
Next step
Choose the next step for E6002
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Thermador 00711542 |
| voltage_rating | 120V AC |
Common Questions
What does E6002 error mean on Thermador dishwasher?
E6002 indicates a blockage in the heat pump, causing the dishwasher to stop mid-cycle.
Can I fix Thermador dishwasher E6002 error myself?
Yes, you can try power cycling the dishwasher to clear the error.
How much does it cost to fix E6002 error?
Repair costs vary based on parts and labor, typically technician-priced.
When should I call a technician for E6002?
Call a technician if the error persists after one power cycle or if there are signs of leakage.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!