Technika Dishwasher Error i50
⚡ Quick Answer: The Technika dishwasher i50 error indicates a malfunction in the drain pump, causing the appliance to stop mid-cycle and display this error code. User... ✅ DIY Fixable
What Does Error i50 Mean?
The Technika dishwasher i50 error indicates a malfunction in the drain pump, causing the appliance to stop mid-cycle and display this error code. Users may notice unusual noises during operation, suggesting that the pump may be clogged or failing. To troubleshoot, perform basic visual checks, including ensuring that filters and the sump area are free from debris. If these steps do not resolve the issue, further inspection may be necessary to address potential motor or pump faults.
Common Symptoms:
- Dishwasher stops mid‑cycle with display showing i50
- Operation halts and error code appears on panel
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error i50
DIY Fix Basic visual checks and reset
- Turn the dishwasher off at the mains or unplug it and wait about 30 seconds.
- Ensure filters and sump area are clear of debris or foam.
- Plug the dishwasher back in and attempt a normal cycle.
Technician Only Service inspection for motor/pump related faults
- Inspect circulation pump and drain pump assemblies for blockages, damage or electrical faults.
- Check wiring harnesses related to pump/motor circuits.
- Test motor winding resistance and control board outputs if accessible.
- Replace defective pump or control board components as required according to model documentation.
Parts needed: Circulation pump, Drain pump, Control board (if diagnosed)
- If error persists after basic resets and visual cleaning
- If unusual noises or water leaks occur
Next step
Choose the next step for i50
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does i50 error mean on Technika dishwasher?
The i50 error indicates a malfunction in the drain pump, causing the dishwasher to stop mid-cycle.
Can I fix Technika dishwasher i50 error myself?
Yes, you can perform visual checks and reset the dishwasher by turning it off and cleaning the filters.
How much does it cost to fix i50 error?
Repair costs for the i50 error can vary based on parts and labor, typically ranging from moderate to high.
When should I call a technician for i50?
Call a technician if the error persists after resets, or if you notice unusual noises or water leaks.
Sources & References
- Technika Dishwasher Error Codes (partial list) (official)
- Dishwasher displays error code i50 | Electrolux (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!