TCL Washing Machine Error E10
⚡ Quick Answer: The TCL washing machine E10 error indicates a drainage issue, primarily due to an inverter or drive system fault. This may cause the machine to displa... ✅ DIY Fixable
What Does Error E10 Mean?
The TCL washing machine E10 error indicates a drainage issue, primarily due to an inverter or drive system fault. This may cause the machine to display the E10 code, stop mid-cycle, and fail to spin the drum or perform motor-driven functions. If the error persists, it’s crucial to inspect the inverter and associated components to ensure proper operation.
Common Symptoms:
- Machine displays E10 on the control panel
- Washer may stop mid‑cycle and not resume
- Drum may not spin or functions requiring motor drive may fail
Possible Causes
- Inverter/drive system fault (high)
- Low or inadequate water supply / pressure (low)
- Water level sensor / water detection fault (low)
- Motor overheating / overload (low)
How to Fix Error E10
DIY Fix Basic checks and reset
- Power off the washing machine and unplug it from the outlet.
- Wait 5–10 minutes to allow internal electronics to reset.
- Plug the machine back in and attempt to restart a wash cycle.
- Ensure the water tap connected to the washer is fully open.
Technician Only Inspect and diagnose inverter/drive system
- Use professional diagnostic tools to confirm inverter fault codes and motor drive errors.
- Inspect inverter board and motor connections for damage, burnt components, or loose wiring.
- Check motor performance and related sensors under load.
- Replace faulty inverter or related drive components as needed.
Parts needed: Inverter/drive board, Motor wiring harness, Motor itself (if necessary)
- If E10 persists after basic reset and checks
- If there are signs of burning smell or visible damage on the control board
- If the washer exhibits motor drive failures or does not spin at all
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E10 error mean on tcl washing machine?
E10 indicates a drainage issue caused by an inverter or drive system fault.
Can I fix tcl washing machine E10 error myself?
Yes, try a power reset by unplugging the machine for 5–10 minutes.
How much does it cost to fix E10 error?
Repair costs range from $150 to $450, depending on parts and location.
When should I call a technician for E10?
Call a technician if the E10 error persists after a reset or if there are burning smells or visible damage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!