Tcl Dehumidifier Error E2

⚡ Quick Answer: The TCL Dehumidifier E2 error indicates a malfunction related to the temperature sensor, which may cause erratic display behavior and prevent the unit... ✅ DIY Fixable

What Does Error E2 Mean?

The TCL Dehumidifier E2 error indicates a malfunction related to the temperature sensor, which may cause erratic display behavior and prevent the unit from dehumidifying. This error suggests that the unit is not receiving correct temperature readings, often due to a faulty or disconnected temperature sensor or issues with the wiring to the control board.

Common Symptoms:

  • Unit stops dehumidifying and displays E2
  • Fan may still run while E2 is displayed
  • Error persists after power reset

Possible Causes

  • Faulty or disconnected temperature/evaporator temperature sensor (medium)
  • Loose or damaged wiring/connector between temperature sensor and control board (medium)
  • Main control board sensor input malfunction (low)

How to Fix Error E2

DIY Fix Basic sensor and connection checks

  1. Unplug the dehumidifier from power.
  2. Check that the temperature/evaporator sensor wiring harness is securely connected and free of corrosion or visible damage.
  3. Inspect wiring for kinks, chafed insulation, or loose clips.
  4. Plug the unit back in and check if the E2 code clears.

Technician Only Sensor testing and replacement

  1. Disconnect power and remove access panels to locate the temperature/evaporator sensor.
  2. Measure sensor resistance with a multimeter and compare to the expected value for the model.
  3. Replace the temperature sensor with a correct OEM part if tests show open or short conditions.
  4. Reassemble and verify operation; if E2 persists, further diagnose PCB sensor input.

Parts needed: Temperature/Evaporator sensor (NTC probe), Wiring harness (if damaged), Multimeter for testing

🛑 When to Call a Pro:
  • If the E2 code persists after basic checks and sensor replacement attempts
  • If wiring harness or PCB diagnostics require advanced electrical troubleshooting
  • If repair involves refrigerant system or complex board replacement

Technical Specifications

wattage 300W
component Humidity Sensor
resistance 1-10 kOhms
part_number TCL-HUM-SENSOR-001
voltage_rating 120V AC

Common Questions

What does E2 error mean on TCL Dehumidifier?

E2 error indicates a malfunction in the temperature sensor, preventing proper dehumidification.

Can I fix TCL Dehumidifier E2 error myself?

Yes, you can check connections and inspect the temperature sensor for visible damage.

How much does it cost to fix E2 error?

Repair costs for sensor parts range from $15 to $80, with additional labor varying.

When should I call a technician for E2?

Call a technician if the error persists after basic checks or if advanced diagnostics are needed.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!