Tcl Air Conditioner Error E2

⚡ Quick Answer: The TCL Air Conditioner E2 error indicates a failure in the indoor temperature sensor, which can lead to erratic temperature readings and inconsistent... ✅ DIY Fixable

What Does Error E2 Mean?

The TCL Air Conditioner E2 error indicates a failure in the indoor temperature sensor, which can lead to erratic temperature readings and inconsistent cooling performance. This issue may be caused by a faulty evaporator/coil temperature sensor or communication problems between the indoor and outdoor units. When the E2 code appears, the unit typically stops its normal cooling or heating cycles, and while the indoor fan may continue to run, the compressor will not engage.

Common Symptoms:

  • Unit displays E2 on indoor unit panel and stops normal cooling/heating cycles.
  • Indoor fan may continue running while compressor/cooling stops.
  • Error persists after normal operation attempts (multiple community posts). [kuxun.cn](

Possible Causes

  • Indoor evaporator/coil temperature sensor fault or abnormal reading (medium)
  • Communication or protection fault between indoor and outdoor units / control modules (medium)

How to Fix Error E2

DIY Fix Basic inspection and reset

  1. Turn off and disconnect power supply to the air conditioner for 5–10 minutes to reset electronic control.
  2. Clean or replace indoor unit air filters to improve airflow (may help if sensor icing or airflow related).
  3. Check that the indoor and outdoor units have secure power and that remote control and settings are correct.

Technician Only Diagnostic and component testing

  1. With power off, inspect the evaporator/coil temperature sensor wiring and connectors for looseness, corrosion, or physical damage.
  2. Use a multimeter to measure temperature sensor resistance and compare with manufacturer’s specified range; replace sensor if out of spec.
  3. Inspect communication wiring between indoor and outdoor PCBs and test continuity; repair or replace damaged wires or connectors.
  4. Test or replace the indoor or outdoor unit control boards if sensor and wiring checks are normal but E2 persists.

Parts needed: Evaporator/coil temperature sensor, Communication wiring harness, Indoor/outdoor unit control PCB

🛑 When to Call a Pro:
  • If the error continues after reset and basic checks
  • If internal components (sensors, wiring, boards) appear damaged or if you lack diagnostic tools
  • If multiple error codes appear or unit cycles on/off repeatedly

Technical Specifications

wattage N/A
component Indoor Temperature Sensor
resistance 10k ohms at 25°C
part_number TCL-TS-001
voltage_rating 5V DC

Common Questions

What does E2 error mean on TCL Air Conditioner?

E2 error indicates a failure in the indoor temperature sensor, causing erratic temperature readings and stopping cooling.

Can I fix TCL Air Conditioner E2 error myself?

Yes, you can perform basic checks like resetting the unit and cleaning air filters to resolve the issue.

How much does it cost to fix E2 error?

Sensor replacement costs are low, while PCB replacement can range from medium to high.

When should I call a technician for E2?

Call a technician if the error persists after basic checks or if you notice damage to internal components.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!