Sub Zero Wine Cooler Error 10-1-00

⚡ Quick Answer: The Sub Zero Wine Cooler error 10-1-00 indicates a failure in the Zone 1 cabinet thermistor, resulting in an open circuit. This can cause erratic temp... ⚠️ Difficulty Varies

What Does Error 10-1-00 Mean?

The Sub Zero Wine Cooler error 10-1-00 indicates a failure in the Zone 1 cabinet thermistor, resulting in an open circuit. This can cause erratic temperature readings and improper cooling in Zone 1, leading to potential spoilage of stored wine. If you see this error, the thermistor or its wiring may need inspection and repair.

Common Symptoms:

  • Error code 10-1-00 displayed on the control panel.
  • Temperature readings may be unavailable or incorrect for Zone 1.
  • Possible improper cooling behavior in the affected zone.

Possible Causes

  • Open circuit in Zone 1 cabinet thermistor or its wiring. (high)

How to Fix Error 10-1-00

DIY Fix Power cycle and check for temporary glitch

  1. Turn the home circuit breaker or unplug the wine cooler for at least 30 seconds.
  2. Restore power and observe if the error returns.

Technician Only Inspect and repair Zone 1 thermistor and wiring

  1. Access the internal thermistor sensor location for Zone 1 in the wine cooler.
  2. Use a multimeter to check thermistor resistance and continuity.
  3. Inspect wiring harness and connectors for damage, open circuits, or corrosion.
  4. Replace the thermistor if it reads open or outside expected resistance range.
  5. After repair, verify proper temperature readings and clear stored error codes with diagnostic tools.

Parts needed: Zone 1 thermistor sensor, Associated wiring harness/connectors

🛑 When to Call a Pro:
  • If the error persists after power cycling.
  • If the wiring or sensor location is inaccessible or you are not experienced with electrical diagnostics.
  • If other error codes appear simultaneously indicating broader system faults.

Next step

Choose the next step for 10-1-00

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kOhms at 25°C
part_number Sub Zero 7002100
voltage_rating 120V AC

Common Questions

What does 10-1-00 error mean on Sub Zero Wine Cooler?

It indicates an open circuit in the Zone 1 cabinet thermistor, causing incorrect temperature readings.

Can I fix Sub Zero Wine Cooler 10-1-00 error myself?

Yes, try power cycling the unit. If the error persists, further inspection is needed.

How much does it cost to fix 10-1-00 error?

Repair costs range from ¥5,000 to ¥20,000 depending on parts and service.

When should I call a technician for 10-1-00?

Call if the error continues after power cycling or if you can't access the wiring.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!