Speed Queen Washing Machine Error TP

⚡ Quick Answer: The Speed Queen washing machine error TP indicates a thermal protection issue, typically caused by the motor overheating. This error results in the wa... ✅ DIY Fixable

What Does Error TP Mean?

The Speed Queen washing machine error TP indicates a thermal protection issue, typically caused by the motor overheating. This error results in the washer stopping mid-cycle. To resolve this, check for an overloaded drum and allow the motor to cool down. If the error persists after cooling and reducing the load, further inspection may be needed.

Common Symptoms:

  • Washer stops mid‑cycle and displays TP or E:tp when the motor overheats or is overloaded (community reports and repair guides).
  • Error may clear after cool‑down period if caused by overload (community repair guidance).

Possible Causes

  • Motor thermal protector tripped due to motor overheating (medium)

How to Fix Error TP

DIY Fix Reduce load and allow cool‑down

  1. Stop the washer and open the lid.
  2. Remove some laundry to ensure the load is not overloaded.
  3. Redistribute the remaining clothes evenly around the drum.
  4. Wait at least 30 minutes to allow the motor to cool.
  5. Restart the washer with a normal sized, balanced load.

DIY Fix Reset machine and retry normal cycle

  1. Turn off the washer and unplug it from the mains.
  2. Wait approximately 1–3 minutes to ensure electronics reset.
  3. Plug the washer back in and restart a wash cycle with a lighter load.

Technician Only Inspect motor and drivetrain for faults

  1. Disconnect power and open access panels.
  2. Check motor bearings, brushes (if applicable), and rotor for wear or damage.
  3. Inspect drive belt and transmission components for friction or binding.
  4. Test motor windings and thermal cut‑off circuitry for proper operation.

Parts needed: Motor assembly, Motor brushes (if applicable), Drive belt, Transmission components, Thermal protector/sensor

🛑 When to Call a Pro:
  • Error persists after reducing load and resetting multiple times.
  • Motor does not spin or makes abnormal noise.
  • Technical inspection reveals worn motor components.

Next step

Choose the next step for TP

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drive Belt

Transfers rotational power from the motor to turn the drum or tub.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
20-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 5-10 ohms
part_number SQ-123456
voltage_rating 120V AC

Common Questions

What does TP error mean on Speed Queen washing machine?

TP error signifies a thermal protection issue due to motor overheating.

Can I fix Speed Queen washing machine TP error myself?

Yes, reduce the load, allow the machine to cool, and reset it.

How much does it cost to fix TP error?

Repair costs range from $150 to $500+, depending on parts and labor.

When should I call a technician for TP?

Call a technician if the error persists after attempts to fix it or if abnormal noises occur.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!