Speed Queen Washing Machine Error PS

⚡ Quick Answer: The Speed Queen washing machine PS error indicates a malfunction in the pressure sensor or water level sensing system. This error typically appears du... ✅ DIY Fixable

What Does Error PS Mean?

The Speed Queen washing machine PS error indicates a malfunction in the pressure sensor or water level sensing system. This error typically appears during or after the fill cycle, causing the washer to improperly fill with water or display a locked door symbol. The issue may stem from a faulty pressure sensor, wiring problems, or blocked water hoses.

Common Symptoms:

  • Error PS appears on display typically during or after a fill cycle
  • Washer may not fill properly or stops mid-cycle
  • Water level may be incorrect or unrecognized

Possible Causes

  • Pressure sensor (water level sensor) malfunction or fault (medium)
  • Wiring or connection issues affecting the pressure sensor signal (medium)

How to Fix Error PS

DIY Fix Basic inspection and reset

  1. Turn off and unplug the washer from power.
  2. Check that both hot and cold water inlet faucets are fully open and hoses are not kinked.
  3. Clean any visible sediment or mineral buildup from the water hoses and inlet valve filters.
  4. Plug the washer back in and run a test cycle to see if the code clears.

Technician Only Inspect and repair pressure sensor and connections

  1. Disconnect power and remove appropriate access panels to reach pressure sensor and harness.
  2. Inspect the pressure sensor hose for cracks, blockages, or disconnections.
  3. Test the pressure sensor operation and wiring harness continuity with appropriate tools.
  4. Replace a faulty pressure sensor or repair damaged wiring as needed.
  5. Reassemble and test to confirm error resolution.

Parts needed: Pressure sensor / pressure switch, Wiring harness, Hose to sensor

🛑 When to Call a Pro:
  • If error persists after basic user‑level steps
  • If wiring or internal sensor components appear damaged
  • If you are not comfortable accessing internal components

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number DLA-12345
voltage_rating 120V AC

Common Questions

What does PS error mean on Speed Queen washing machine?

The PS error signals a problem with the pressure sensor, affecting water fill levels.

Can I fix Speed Queen washing machine PS error myself?

Yes, you can inspect connections, clean hoses, and reset the machine.

How much does it cost to fix PS error?

The estimated cost for parts to fix the PS error ranges from $50 to $200, excluding labor.

When should I call a technician for PS?

Call a technician if the error persists after troubleshooting or if internal components appear damaged.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!