Speed Queen Washing Machine Error E19

⚡ Quick Answer: The Speed Queen Washing Machine error E19 signifies a failure in communication between the card reader and the control board, typically seen in commer... ✅ DIY Fixable

What Does Error E19 Mean?

The Speed Queen Washing Machine error E19 signifies a failure in communication between the card reader and the control board, typically seen in commercial models. This error may prevent the washer from starting or accepting card transactions. If you hear unusual noises or see the E19 code on the display, it indicates that the drain pump may not be functioning correctly, leading to drainage issues. Inspect the card reader and connections for potential damage or corrosion to resolve this error.

Common Symptoms:

  • Washer displays EC:19 or E19 on the control panel
  • Washer may not start or accept card transactions
  • Communication between card reader and control board has failed

Possible Causes

  • No communication between card reader/payment interface and control board (medium)
  • Loose, corroded, or damaged connection harness between card reader and main control (medium)
  • Faulty card reader/payment interface hardware (medium)

How to Fix Error E19

DIY Fix Restart and check external payment components

  1. Turn off the washer at the wall outlet or main switch.
  2. Wait at least 30 seconds and then restore power.
  3. Attempt to use the card reader again to see if the code clears.

Technician Only Inspect and repair communication interface connection

  1. Disconnect power to the washer at the breaker or unplug thoroughly.
  2. Access the control board and card reader/payment interface wiring harness.
  3. Visually inspect connectors for corrosion, looseness, or damage, and reseat securely.
  4. Test continuity if available and replace any damaged harness sections.
  5. Restore power and confirm whether EC:19 clears.

Parts needed: Card reader interface, Control board harness, Connectors

Technician Only Replace faulty card reader or payment interface

  1. Power down machine.
  2. Remove and replace the card reader or payment interface module.
  3. Verify proper connection to the main control board.
  4. Power up and test to confirm error is resolved.

Parts needed: Card reader/payment interface unit

🛑 When to Call a Pro:
  • If the error persists after reseating connections and power-cycling
  • If internal inspection beyond simple connector checks is required
  • If the card reader hardware appears physically damaged

Next step

Choose the next step for E19

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-20 ohms
part_number SQ-DRN-PMP-001
voltage_rating 120V AC

Common Questions

What does E19 error mean on Speed Queen Washing Machine?

E19 indicates a communication failure between the card reader and control board, preventing operations.

Can I fix Speed Queen Washing Machine E19 error myself?

Yes, try restarting the washer and checking the card reader connections.

How much does it cost to fix E19 error?

Estimated repair costs range from $50 to $200 depending on parts and labor.

When should I call a technician for E19?

Call a technician if the error persists after checking connections or if the card reader is damaged.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!