Speed Queen Washing Machine Error E14

⚡ Quick Answer: The Speed Queen Washing Machine error E14 indicates a potential malfunction in the door lock mechanism. This may prevent the door from opening or clos... ⚠️ Difficulty Varies

What Does Error E14 Mean?

The Speed Queen Washing Machine error E14 indicates a potential malfunction in the door lock mechanism. This may prevent the door from opening or closing properly, disrupting the washing cycle. If you encounter this error, it's essential to ensure the door is fully closed and latched, as well as to check for any obstructions. Power cycling the washer by unplugging it for a few minutes can also help reset the system.

Possible Causes

  • Door Lock Assembly

How to Fix Error E14

DIY Fix Basic checks due to unknown code

  1. Power‑cycle the washer by unplugging it for 1–3 minutes and then plugging it back in.
  2. Check that water supply valves are fully open and hoses are not kinked or blocked.
  3. Ensure the washer door/lid is fully closed and latched properly.

Technician Only Service diagnostics

  1. Connect a diagnostic tool or enter service mode (if available) to read stored fault history.
  2. Inspect electrical connections and control board for unusual faults.
  3. Refer to official Speed Queen service documentation for your specific model.
🛑 When to Call a Pro:
  • If the error persists after basic checks and power cycling, contact Speed Queen support or a certified technician, especially if the washer fails to operate normally.

Next step

Choose the next step for E14

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 0-5 ohms
part_number SQ-DLA-001
voltage_rating 120V AC

Common Questions

What does E14 error mean on Speed Queen Washing Machine?

E14 indicates a malfunction in the door lock mechanism, affecting door operation.

Can I fix Speed Queen Washing Machine E14 error myself?

Yes, you can perform basic checks like ensuring the door is closed and power cycling the machine.

How much does it cost to fix E14 error?

The repair cost varies by model and region; consult a technician for an estimate.

When should I call a technician for E14?

Call a technician if the error persists after basic troubleshooting, especially if the machine is not operating normally.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!