Speed Queen Washing Machine Error E13

⚡ Quick Answer: The Speed Queen Washing Machine error E13 typically indicates a malfunction in the door lock mechanism. This may prevent the door from unlocking or ca... ⚠️ Difficulty Varies

What Does Error E13 Mean?

The Speed Queen Washing Machine error E13 typically indicates a malfunction in the door lock mechanism. This may prevent the door from unlocking or cause the machine to fail to start. To address this issue, confirm the specific model of your washer and check the user manual or contact Speed Queen support for guidance on resolving the E13 error.

Possible Causes

  • Door Lock Assembly
  • Control Board
  • Wiring Issues

How to Fix Error E13

DIY Fix Confirm Speed Queen model-specific code

  1. Locate your exact washer model number (on the back/side of the unit).
  2. Check the official Speed Queen user manual or support site for that model’s error codes.
  3. Contact Speed Queen support to ask specifically what E13 means for your model.

Technician Only Diagnostic evaluation for non‑standard code

  1. Access service documentation or diagnostic mode for the specific Speed Queen model.
  2. Check for common washer faults (drain issues, door lock faults, pressure switch problems) even though not confirmed for E13 on this brand.
  3. Use diagnostic tools (multimeter, service tester) to verify sensor and component integrity.
🛑 When to Call a Pro:
  • If the washer displays E13 with no clear cause after basic checks.
  • If water leakage, electrical smell, or no spin/drain persists.
  • If error appears on control panel with operational failures and user cannot diagnose with model documentation.

Next step

Choose the next step for E13

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number SQ-123456
voltage_rating 120V AC

Common Questions

What does E13 error mean on Speed Queen Washing Machine?

E13 indicates a malfunction in the door lock mechanism, affecting the washer's ability to start.

Can I fix Speed Queen Washing Machine E13 error myself?

Yes, check your model number and refer to the user manual or contact Speed Queen support for specific instructions.

How much does it cost to fix E13 error?

Repair costs for the E13 error vary by model and region; consult a technician for an estimate.

When should I call a technician for E13?

Call a technician if the E13 error persists after basic checks or if there are additional issues like leakage or electrical smells.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!