Speed Queen Washing Machine Error dL

⚡ Quick Answer: The dL error on your Speed Queen Washing Machine indicates a malfunction in the door lock mechanism. This may prevent the door from locking properly, ... ✅ DIY Fixable

What Does Error dL Mean?

The dL error on your Speed Queen Washing Machine indicates a malfunction in the door lock mechanism. This may prevent the door from locking properly, which can result in the machine not starting or stopping mid-cycle. Common causes include a failure or misalignment of the door lock mechanism, or an obstruction preventing proper closure. Ensuring the door is firmly closed and aligned can often resolve the issue, but persistent problems may require professional inspection.

Common Symptoms:

  • Machine will not start or continue cycle
  • Door/lid not locking
  • Door/lid fails to unlock after cycle or power interrupt

Possible Causes

  • Door lock mechanism failure or misalignment (medium)
  • Obstruction or improper door closure (medium)

How to Fix Error dL

DIY Fix Check and retry door closure

  1. Stop the washer and open the door/lid (if safe)
  2. Inspect door seal area for obstructions
  3. Firmly close the door ensuring alignment and latch engagement
  4. Restart the wash cycle

DIY Fix Power reset to clear transient errors

  1. Turn off the washer or unplug it from power
  2. Wait 30–60 seconds
  3. Plug it back in and restart a cycle

Technician Only Inspect and service door lock assembly

  1. Disconnect power to washer
  2. Remove access panel around door/lid lock
  3. Test door lock/switch assembly for continuity
  4. Replace faulty door lock or latch components as needed
  5. Reassemble and test lock operation

Parts needed: Door lock mechanism, Latch assembly

🛑 When to Call a Pro:
  • If error persists after basic checks and resets
  • If door lock assembly feels damaged or doesn’t engage at all

Next step

Choose the next step for dL

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 10-30 ohms
part_number Speed Queen 201185P
voltage_rating 120V AC

Common Questions

What does dL error mean on Speed Queen Washing Machine?

The dL error means the washer door is not locking properly, preventing the machine from starting or continuing its cycle.

Can I fix Speed Queen Washing Machine dL error myself?

Yes, you can check the door closure for obstructions and perform a power reset to potentially resolve the issue.

How much does it cost to fix dL error?

$80-$200 for parts and labor to repair the door lock mechanism.

When should I call a technician for dL?

Call a technician if the error persists after basic checks or if the door lock assembly appears damaged.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!