Speed Queen Stack Washer/Dryer Error E20
⚡ Quick Answer: The Speed Queen Stack Washer/Dryer E20 error code indicates a potential issue with the drain pump, leading to failure in draining water and possibly c... ✅ DIY Fixable
What Does Error E20 Mean?
The Speed Queen Stack Washer/Dryer E20 error code indicates a potential issue with the drain pump, leading to failure in draining water and possibly causing unusual noises during operation. It's crucial to diagnose any drainage problems promptly to ensure proper functionality.
Common Symptoms:
- Unit displays code "E20" on the control panel
- Possible cycle interruption or inability to complete cycle
Possible Causes
- Drain Pump
- Blocked Drain Filter
- Wiring Issues
How to Fix Error E20
DIY Fix Check Basic Drainage Components
- Power off and unplug the unit.
- Inspect the washer’s drain hose for kinks, twists, or blockages.
- Check any accessible pump filter or trap (if present) for debris.
- Ensure that the drain line is not clogged or restricted.
Technician Only Perform Detailed Drain System Diagnosis
- Remove access panels as needed to inspect internal drain pump and hoses.
- Check for obstructions, debris, or foreign objects in the drain system.
- Test drain pump operation and continuity with appropriate tools.
- Inspect wiring and connectors to the drain components for faults.
Parts needed: Drain pump assembly, Drain hose, Associated gaskets and clamps
- If the error persists after basic drainage checks and cleaning.
- If internal wiring or pump components appear damaged or malfunctioning.
- If you are uncomfortable performing internal inspections.
Next step
Choose the next step for E20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | SQ-DRP-001 |
| voltage_rating | 120V AC |
Common Questions
What does E20 error mean on Speed Queen Stack Washer/Dryer?
The E20 error indicates a malfunction in the drain pump, preventing proper drainage.
Can I fix Speed Queen Stack Washer/Dryer E20 error myself?
Yes, you can check the drain hose for blockages and clean any accessible pump filters.
How much does it cost to fix E20 error?
Repair costs vary based on parts and labor, typically depending on the specific issue.
When should I call a technician for E20?
Call a technician if the error persists after basic checks or if you notice damage to internal components.
Sources & References
- Speed Queen Manuals & Downloads Portal (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!