Speed Queen Stack Washer/Dryer Error E16
⚡ Quick Answer: The Speed Queen Stack Washer/Dryer error code E16 indicates a gas ignition failure, where the dryer runs but the gas burner does not ignite. This can ... ✅ DIY Fixable
What Does Error E16 Mean?
The Speed Queen Stack Washer/Dryer error code E16 indicates a gas ignition failure, where the dryer runs but the gas burner does not ignite. This can result in the heat cycle not producing any heat, while the control panel displays the E16 code. Common causes include failure of the gas ignition components like the igniter or gas valve coils, or issues with the gas supply such as a closed shutoff valve or low gas pressure.
Common Symptoms:
- Dryer appears to run but no flame ignition is present.
- Heat cycle does not produce heat despite normal motor operation.
- E16 code displayed on control panel during or after start of a heat cycle.
Possible Causes
- Gas ignition component failure (e.g., igniter, gas valve coils, flame sensor) (medium)
- Gas supply issues (shutoff valve closed, low gas pressure) (medium)
How to Fix Error E16
DIY Fix Verify Basic Gas Supply and Reset
- Ensure the gas shutoff valve to the dryer is fully open.
- Check that other gas appliances in the home are functioning to verify gas availability.
- Power cycle the stack unit (turn off, wait 60 seconds, then turn back on) to see if the code clears.
Technician Only Diagnose and Replace Ignition Components
- Turn off the gas supply and electrical power to the unit.
- Remove access panels to inspect the burner assembly.
- Verify igniter functionality using a multimeter; replace if open or out of spec.
- Test gas valve coils for continuity and replace if weak/failed.
- Inspect and clean or replace the flame sensor as needed.
Parts needed: Igniter, Gas valve coils, Flame sensor
- If you smell gas at any time.
- If you are unable to safely access or test internal ignition components.
- If the error persists after basic supply and reset checks.
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Gas Valve
Controls the flow of natural gas or propane to the burner jets.
- Typical part-only price
- $60 - $140
- DIY difficulty
- Hard
- Estimated time
- 45-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Flame Sensor
Confirms burner flame or radiant heat so the appliance can control gas flow safely.
Model-compatible Stack Washer/Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E16 error mean on Speed Queen Stack Washer/Dryer?
E16 indicates a gas ignition failure, where the dryer runs but the gas burner does not ignite.
Can I fix Speed Queen Stack Washer/Dryer E16 error myself?
Yes, you can check gas supply and perform a reset by turning off the unit for 60 seconds.
How much does it cost to fix E16 error?
Estimated repair costs range from $75 to $250 for parts, depending on the specific components needed.
When should I call a technician for E16?
Call a technician if you smell gas, can't access ignition components, or if the error persists after your checks.
Sources & References
- Speed Queen Manuals & Downloads (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!