Speed Queen Commercial Washer Error OF
⚡ Quick Answer: The Speed Queen Commercial Washer displays the OF error code when it detects an overflow condition, indicating that the water level has surpassed the ... ✅ DIY Fixable
What Does Error OF Mean?
The Speed Queen Commercial Washer displays the OF error code when it detects an overflow condition, indicating that the water level has surpassed the safe threshold. This issue can arise from a stuck-open water inlet valve, a malfunctioning pressure switch, or blockages in the air trap. Users may notice water pooling around the base of the washer or hear unusual sounds from the drain pump as the machine attempts to expel excess water.
Common Symptoms:
- Washer displays OF or Er, OF code on panel
- Machine begins to pump water out due to high water level
Possible Causes
- Water level too high (overflow) (medium)
- Stuck-open water inlet valve (medium)
- Pressure switch / water level sensor fault or air trap blockage (medium)
How to Fix Error OF
DIY Fix Initial checks for OF error
- Turn off the washer and stop the cycle
- Check that the water supply valves are fully closed
- Inspect hoses and connections for obvious leaks or kinks
- Observe if water continues entering when machine should not be filling
Technician Only Diagnose and repair overflow/water level issues
- Disconnect power and water supply
- Inspect and test water inlet valves for proper closing function; clean or replace if necessary
- Check pressure switch and pressure sensing tube for blockages, kinks, or leaks
- Verify control board water level readings and replace sensor if faulty
Parts needed: Water inlet valve(s), Pressure switch / level sensor, Pressure tube / air trap
- If water continues to enter when valves are off
- If internal components (valve or sensor) appear damaged or require replacement
Next step
Choose the next step for OF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Pressure Switch |
| resistance | 10-20 ohms |
| part_number | SQ-123456 |
| voltage_rating | 120V AC |
Common Questions
What does OF error mean on Speed Queen Commercial Washer?
The OF error indicates an overflow condition, meaning water has exceeded the safe level.
Can I fix Speed Queen Commercial Washer OF error myself?
Yes, you can check water supply valves, inspect hoses for leaks, and ensure there are no blockages.
How much does it cost to fix OF error?
Estimated repair costs range from $80 to $300+, depending on parts and labor.
When should I call a technician for OF?
Call a technician if water continues to enter when valves are closed or if internal components are damaged.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!