Speed Queen Commercial Washer Error LK

⚡ Quick Answer: The Speed Queen Commercial Washer error code LK signifies an issue with the door lock mechanism. This malfunction can prevent the washer from starting... ❌ Professional Repair Recommended

What Does Error LK Mean?

The Speed Queen Commercial Washer error code LK signifies an issue with the door lock mechanism. This malfunction can prevent the washer from starting and may display a locked door symbol. It is essential to ensure the door is properly closed and the locking mechanism is functioning. If the problem persists, further investigation may be needed to identify the root cause.

Possible Causes

  • Door Lock Assembly
  • Control Board
  • Wiring Issues

How to Fix Error LK

  1. Inspect the Door Lock Mechanism: Open the washer door and visually inspect the door lock mechanism for any visible damage or obstructions. Ensure that it moves freely without any resistance.
  2. Test the Door Lock Assembly: Using a multimeter, check the continuity of the door lock assembly. Disconnect the wiring harness and measure resistance across the terminals. A reading of infinite resistance indicates a faulty lock.
  3. Examine Wiring Connections: Inspect the wiring harness connected to the door lock for any signs of wear, fraying, or disconnection. Repair or replace any damaged wires.
  4. Check the Control Board: If the door lock assembly and wiring are intact, examine the control board for any burnt components or loose connections. If necessary, replace the control board.

Next step

Choose the next step for LK

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

Typical part-only price
$30 - $75
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number SQ-LOCK-001
voltage_rating 120V AC

Common Questions

What does LK error mean on Speed Queen Commercial Washer?

The LK error indicates a malfunction in the door lock mechanism, preventing the washer from starting.

Can I fix Speed Queen Commercial Washer LK error myself?

Currently, no specific DIY actions are documented for resolving the LK error.

How much does it cost to fix LK error?

Repair costs for the LK error vary depending on the model and region.

When should I call a technician for LK?

You should call a technician if basic troubleshooting does not resolve the LK error.

Sources & References

Data last verified: 2026-07-20

User Comments (0)

Share your experience or solution below.

Be the first to comment!