Speed Queen Commercial Washer Error Ld

⚡ Quick Answer: The Speed Queen Commercial Washer Ld error indicates a long drain issue, where the washer fails to drain water effectively, leading to a full drum and... ✅ DIY Fixable

What Does Error Ld Mean?

The Speed Queen Commercial Washer Ld error indicates a long drain issue, where the washer fails to drain water effectively, leading to a full drum and potential overflow. This problem can arise from drain path obstructions, such as clogged hoses or filters, or issues with the lid or lid lock mechanism not engaging properly. Addressing these issues promptly can prevent water damage and ensure your washer operates efficiently.

Common Symptoms:

  • Washer stops near end of drain or spin phase
  • Water remains in tub after cycle
  • Error appears shortly after wash or rinse when draining

Possible Causes

  • Drain system obstruction (clogged filter/hose/drain) (medium)
  • Lid or lid lock not engaging properly (medium)

How to Fix Error Ld

DIY Fix Inspect and Clear Drain Path

  1. Unplug washer and turn off water supply
  2. Check and straighten drain hose for kinks
  3. Remove and inspect drain hose and pump filter for debris or obstructions
  4. Reassemble and run a short drain/spin cycle to test

DIY Fix Check Lid Closure and Lock Engagement

  1. Verify washer lid closes fully without laundry interfering
  2. Clean around lid lock mechanism to remove lint/debris
  3. Restart cycle to see if lid locks properly

Technician Only Service Drain Pump and Components

  1. Disconnect power and water
  2. Remove access panels to inspect drain pump impeller and housing
  3. Test drain pump operation and continuity with multimeter
  4. Replace pump or hoses if defective

Parts needed: Drain pump, Drain hose, Pump filter

Technician Only Diagnose and Repair Lid Lock Assembly

  1. Test lid lock switch for continuity
  2. Inspect wiring harness to control board for damage
  3. Replace lid lock assembly if faulty

Parts needed: Lid lock/switch assembly, Wiring harness

🛑 When to Call a Pro:
  • Water leaking from base during drain
  • No improvement after clearing clogs and checking lid lock
  • Unusual noises from drain pump

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number Speed Queen 201148P
voltage_rating 120V AC

Common Questions

What does Ld error mean on Speed Queen Commercial Washer?

The Ld error means there is a long drain issue, often due to clogged drains or lid lock problems.

Can I fix Speed Queen Commercial Washer Ld error myself?

Yes, you can check and clear the drain path or inspect the lid lock mechanism for issues.

How much does it cost to fix Ld error?

Repair costs for the Ld error typically range from $80 to $250, depending on the issue.

When should I call a technician for Ld?

Call a technician if there's water leaking from the washer, no improvement after DIY fixes, or if you hear unusual noises from the drain pump.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!