Solt Refrigerator Error E01

DIY Fix Gather basic information and check power

1. Ensure the refrigerator is plugged in securely and receiving power.
2. Check that the temperature settings are within normal ranges (e.g., standard cooling range).
3. Observe if the E01 error appears at startup, intermittently, or after a particular event (e.g., after a power cut).

DIY Fix Attempt basic reset and environment checks

1. Disconnect power by unplugging the unit for ~5 minutes, then reconnect to see if the code disappears.
2. Check that vents and airflow passages inside the fridge are not blocked by food items.
3. Verify there is adequate space around the fridge (recommended a few centimetres clearance) for ventilation.
4. Ensure doors are sealing properly.

Technician Only Professional diagnosis by authorized service

1. Use diagnostic tools to read any logged fault data in the refrigerator’s controller.
2. Check key sensors (temperature sensors/thermistors) and communications between control board modules.
3. Inspect control board and wiring harness for faults or intermittent connections.
4. Verify compressor and fan operations as part of full system verification.

Parts needed: Temperature sensors (NTC thermistors), Control board, Wiring harness