Smeg Refrigerator Error E13

⚡ Quick Answer: The Smeg Refrigerator E13 error indicates a potential issue with the door or bin switch, which may prevent the appliance from functioning correctly. T... ✅ DIY Fixable

What Does Error E13 Mean?

The Smeg Refrigerator E13 error indicates a potential issue with the door or bin switch, which may prevent the appliance from functioning correctly. This error can lead to poor cooling performance and unusual noises if the door or bin is not latching properly. To resolve the E13 error, ensure the refrigerator doors are fully closed and that the ice bin is correctly seated. If problems persist, further inspection of the switches may be necessary.

Common Symptoms:

  • E13 appears on the display when the fridge/ice maker detects a switch fault or thinks a door/bin is open incorrectly
  • Refrigeration not performing expected operations if tied to door sensing

Possible Causes

  • Door or bin switch misalignment or failure (low)

How to Fix Error E13

DIY Fix Check door/basket closure and reset power

  1. Carefully open and close the refrigerator doors ensuring they fully latch.
  2. Check that the bin/ice tray is seated correctly.
  3. Turn off the refrigerator at the mains for 5 minutes then power back on.

Technician Only Inspect and replace faulty door/bin switch

  1. Disconnect power to the refrigerator.
  2. Access the door switch / bin switch assembly.
  3. Check alignment and operation of the switch actuators.
  4. Test continuity and operation with a multimeter.
  5. Replace failed switch or wiring if needed.

Parts needed: Door switch or microswitch assembly, Actuator or bracket hardware

🛑 When to Call a Pro:
  • If the error persists after power reset and door/switch checks
  • If doors appear closed but switches do not actuate normally
  • If internal components need disassembly beyond user‑accessible panels

Technical Specifications

wattage 30W
component Evaporator Fan Motor
resistance 10-20 ohms
part_number SMEG-EF1234
voltage_rating 220V AC

Common Questions

What does E13 error mean on Smeg Refrigerator?

E13 indicates a door or bin switch fault, affecting cooling performance.

Can I fix Smeg Refrigerator E13 error myself?

Yes, check door closure and reset power to resolve the issue.

How much does it cost to fix E13 error?

Repair costs range from ¥3,000 to ¥12,000 for parts, plus labor.

When should I call a technician for E13?

Call a technician if the error persists after checks or if components need disassembly.

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!