Smeg Refrigerator Error E07

⚡ Quick Answer: The Smeg Refrigerator error E07 indicates a potential issue with the compressor or a related sensor anomaly, often accompanied by unusual humming soun... ✅ DIY Fixable

What Does Error E07 Mean?

The Smeg Refrigerator error E07 indicates a potential issue with the compressor or a related sensor anomaly, often accompanied by unusual humming sounds and inadequate cooling. If this error appears on your display, it may signify a voltage drop or sensor malfunction. To troubleshoot, ensure the refrigerator is securely plugged in and that the power supply is stable. A simple power cycle—unplugging the unit for about 10 minutes—may also help clear the error.

Common Symptoms:

  • Error E07 appears on the refrigerator display
  • Possible associated cooling or sensor anomaly reported in community‑sourced third‑party guides

Possible Causes

  • Compressor Relay
  • Compressor Overload Protector
  • Faulty Compressor

How to Fix Error E07

DIY Fix Basic checks and safe power cycle

  1. Check that the refrigerator is plugged in securely and power supply is stable.
  2. Try unplugging the refrigerator power for about 10 minutes, then plug it back in to see if the error clears.
  3. Ensure the mains voltage is within the correct range for your appliance.

Technician Only Professional diagnosis if E07 persists

  1. Measure and verify mains voltage to ensure it is within specification.
  2. Inspect internal sensors and control board connections for faults.
  3. Use diagnostic tools to check for sensor warnings or other logged faults on the fridge’s control board.

Parts needed: Multimeter or diagnostic tool, Control board (if sensor fault confirmed), Sensor assemblies (if identified as faulty)

🛑 When to Call a Pro:
  • If the error E07 persists after a power cycle and stable mains voltage conditions are confirmed.
  • If the refrigerator has cooling issues such as inability to maintain temperature.
  • If there are additional error codes or warning indicators present simultaneously.

Next step

Choose the next step for E07

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 150W
component Compressor
resistance 3-5 ohms
part_number Smeg 0019533000
voltage_rating 220-240V AC

Common Questions

What does E07 error mean on Smeg Refrigerator?

E07 indicates a compressor or sensor issue, often with cooling problems.

Can I fix Smeg Refrigerator E07 error myself?

Yes, check power connections and try a power cycle to reset the appliance.

How much does it cost to fix E07 error?

Repair costs vary by region and parts; consult a professional for accurate estimates.

When should I call a technician for E07?

Call a technician if the error persists after a power cycle or if cooling issues continue.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!