Smeg Dryer Error F08

What Does Error F08 Mean?

The Smeg Dryer error F08 indicates a potential malfunction in the heating element, which often results in no heat during the drying cycle. If you encounter this error, it is essential to perform some basic checks to identify any obvious issues, such as ensuring the door is securely closed and the dryer isn't overloaded.

Possible Causes

• Heating Element

How to Fix Error F08

DIY Fix Check basic conditions

1. Power the dryer off and unplug it.
2. Check that the door is fully closed and latched.
3. Ensure the dryer is not overloaded with laundry.

Technician Only Contact Smeg support or qualified service

1. Provide the exact dryer model and serial number to Smeg support.
2. Request the official meaning of error code F08 for your specific model.
3. If directed, have a qualified technician inspect the dryer’s electrical and heating systems.

🛑 When to Call a Pro:

• If the error persists after basic checks, **do not attempt internal repairs**, and contact qualified service.

Next step

Choose the next step for F08

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Heating Element

Heats the water or air inside the appliance to the required temperature.

Typical part-only price

$40 - $95

DIY difficulty

Medium

Estimated time

30-45 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage	2000W
component	Heating Element
resistance	10-30 ohms
part_number	Smeg 123456789
voltage_rating	230V AC

Common Questions

What does F08 error mean on Smeg Dryer?

F08 error on Smeg Dryer indicates a malfunction in the heating element, leading to no heat during drying.

Can I fix Smeg Dryer F08 error myself?

Yes, check basic conditions like ensuring the door is closed and the dryer is not overloaded.

How much does it cost to fix F08 error?

Repair costs for F08 error vary by model and region.

When should I call a technician for F08?

If the F08 error persists after basic checks, contact qualified service without attempting internal repairs.

Sources & References

• SMEG manuals download portal (general manuals available) (official)

Data last verified: 2026-07-22