Simpson Dishwasher Error iE0

⚡ Quick Answer: The Simpson Dishwasher error code iE0 indicates a potential water leakage detection issue, often manifesting as unusual sounds from the pump along wit... ✅ DIY Fixable

What Does Error iE0 Mean?

The Simpson Dishwasher error code iE0 indicates a potential water leakage detection issue, often manifesting as unusual sounds from the pump along with a flashing display. Although this specific code may not be documented in some models, it’s essential to check user manuals for corresponding LED flash patterns or any additional error information. If you experience continuous display of the iE0 code, it may signify that the appliance is unable to complete its cycle due to water supply or leakage problems.

Possible Causes

  • Leakage Sensor
  • Drain Pump Assembly
  • Hoses and Connections

How to Fix Error iE0

DIY Fix Consult the model‑specific manual and Simpson support

  1. Locate your dishwasher’s full model number printed on the appliance label (usually on the door frame).
  2. Search for the exact Simpson user/service manual for that model online (e.g., at manualslib.com or the official Simpson support site).
  3. Check the error code or LED flash legend within that manual; many Simpson models do not use alphanumeric codes like 'iE0'.
  4. If the code is not documented, contact Simpson customer support with your model and exact error display.
🛑 When to Call a Pro:
  • If the dishwasher displays the code continuously and you cannot find any reference in the official manual for your exact model.
  • If the dishwasher stops mid‑cycle and won’t restart after power off/on and verifying water supply.
  • If water is leaking, flooding, or there are electrical smells or unusual noises.

Next step

Choose the next step for iE0

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 1800W
component Leakage Sensor
resistance 5-15 ohms
part_number SDW-LEAK-SENSOR-001
voltage_rating 240V AC

Common Questions

What does iE0 error mean on Simpson Dishwasher?

The iE0 error indicates a potential water leakage detection issue, often accompanied by unusual sounds and a flashing display.

Can I fix Simpson Dishwasher iE0 error myself?

Yes, you can check the model-specific manual for troubleshooting steps, verify the water supply, and review the LED flash patterns.

How much does it cost to fix iE0 error?

Repair costs can vary widely based on model and region; consult a technician for a precise estimate.

When should I call a technician for iE0?

Call a technician if the error persists, the dishwasher stops mid-cycle, or if you notice water leaking or unusual noises.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!