Simpson Dishwasher Error i60
⚡ Quick Answer: The i60 error code on a Simpson dishwasher indicates a potential malfunction in the drain pump, often leading to unusual operational noises and failur... ✅ DIY Fixable
What Does Error i60 Mean?
The i60 error code on a Simpson dishwasher indicates a potential malfunction in the drain pump, often leading to unusual operational noises and failure to drain water effectively. This issue may also be related to heating problems, such as a malfunctioning heating element or temperature sensor. If the dishwasher stops mid-cycle and displays the i60 error, it is essential to check the basic functionality and perform a reset before seeking professional assistance.
Common Symptoms:
- Dishwasher stops mid‑cycle and displays i60 (based on analogous brand reports)
- Warm unit with incomplete heating indicated (from community sources for other brands)
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error i60
DIY Fix Check basic dishwasher status and do a reset
- Turn off the dishwasher and disconnect power at the wall or circuit breaker for a few minutes.
- Reconnect power and attempt to restart a wash cycle.
- Observe whether the error returns.
Technician Only Consult service technician for diagnostic
- Have a qualified appliance technician inspect the dishwasher’s heating system components (heating element, temperature sensor/thermostat).
- Check wiring harnesses and connectors related to heating components.
- Review control board diagnostics and error history with professional tools if available.
Parts needed: Heating element, Temperature sensor/thermostat, Control board
- If the error persists after reset and basic observation
- If suspected heating components show signs of damage
- If water temperature remains cold during cycles
Next step
Choose the next step for i60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does i60 error mean on simpson dishwasher?
The i60 error indicates a malfunction in the drain pump, potentially leading to drainage issues and unusual noises.
Can I fix simpson dishwasher i60 error myself?
Yes, you can try resetting the dishwasher by turning it off and disconnecting power for a few minutes before restarting.
How much does it cost to fix i60 error?
Repair costs can vary, but typically range from moderate to high depending on parts and labor for component replacement.
When should I call a technician for i60?
Call a technician if the error persists after a reset, if heating components are damaged, or if water remains cold during cycles.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!