Siemens Refrigerator Error E16

⚡ Quick Answer: The Siemens Refrigerator E16 error signifies a potential issue with the door switch or magnetic reed sensor, leading to incorrect door state detection... ⚠️ Difficulty Varies

What Does Error E16 Mean?

The Siemens Refrigerator E16 error signifies a potential issue with the door switch or magnetic reed sensor, leading to incorrect door state detection. Symptoms include malfunctioning interior lights, faulty door alarms, and control behavior as if the door is constantly open. These issues can result in inconsistent cooling performance and temperature fluctuations. Common causes include a faulty door switch, misaligned door magnets, or damaged wiring.

Common Symptoms:

  • Interior lights may stay on or off when they shouldn’t
  • Door alarm may not function correctly or false door-open conditions
  • Control may behave as if the door is always open (potential temperature impact)

Possible Causes

  • Faulty door switch or magnetic reed sensor (medium)
  • Misaligned door magnet (medium)
  • Broken or loose wiring to sensor/switch (medium)

How to Fix Error E16

DIY Fix Check door alignment and basic door sealing

  1. Ensure refrigerator door closes fully and seal gasket is free of debris
  2. Visually inspect that the magnet area on the door meets its corresponding sensor on the frame

DIY Fix Power cycle and simple reset

  1. Unplug the refrigerator from power
  2. Wait 5–10 minutes
  3. Plug the refrigerator back in and observe if E16 clears

Technician Only Inspect and replace faulty door switch/reed sensor

  1. Disconnect power to the refrigerator
  2. Remove trim/panel to access door switch or magnetic reed sensor
  3. Test continuity/function of switch/sensor
  4. Replace defective switch or sensor with manufacturer‑specified part

Parts needed: Door switch or magnetic reed sensor assembly, Connectors/wiring as necessary

Technician Only Inspect wiring harness for breakage or loose connectors

  1. Power off and isolate the fridge
  2. Trace wiring from switch/sensor to main control board
  3. Repair or replace damaged wiring and ensure proper connector seating

Parts needed: Wiring harness segments, Connectors, Insulation/terminal repair kit

🛑 When to Call a Pro:
  • If E16 persists after checking door alignment and basic reset
  • If internal wiring or sensor testing is beyond safe DIY capability

Next step

Choose the next step for E16

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage
component Temperature Sensor
resistance 5-10 kOhms at 25°C
part_number 00619936
voltage_rating 230V AC

Common Questions

What does E16 error mean on Siemens Refrigerator?

E16 error indicates a malfunction in the door switch or magnetic reed sensor, causing incorrect door state detection.

Can I fix Siemens Refrigerator E16 error myself?

Yes, check door alignment, ensure the seal is clean, and perform a power cycle reset.

How much does it cost to fix E16 error?

Estimated repair cost for the E16 error ranges from 50 to 150 USD for parts only.

When should I call a technician for E16?

Call a technician if E16 persists after user checks or if internal wiring issues arise.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!