Sharp Refrigerator Error LOPO
⚡ Quick Answer: The Sharp Refrigerator LOPO error code indicates a low temperature condition, often linked to a continuous running compressor and unusually low temper... ✅ DIY Fixable
What Does Error LOPO Mean?
The Sharp Refrigerator LOPO error code indicates a low temperature condition, often linked to a continuous running compressor and unusually low temperature readings. It may also signal a potential voltage irregularity, affecting the refrigerator's performance. To address this issue, users should first check the power supply and perform a reset by unplugging the refrigerator for a few minutes.
Common Symptoms:
- Error code LOPO displayed on refrigerator panel (specific symptom details not available in official sources)
Possible Causes
- Possible voltage irregularity warning (low)
How to Fix Error LOPO
DIY Fix Check power supply and reset
- Ensure refrigerator is plugged into a properly functioning outlet
- Try connecting the refrigerator to a different known‑good outlet
- Reset the refrigerator by unplugging for several minutes and then reconnecting
Technician Only Electrical system inspection
- Measure incoming voltage to the refrigerator to verify it is within the appliance’s acceptable range
- Inspect the power cord and internal power supply components for damage
- Test compressor operation and voltage regulation modules
Parts needed: Voltage regulator (if present), Power cord, Control board
- If the error persists after power checks and reset
- If there are signs of electrical issues (sparks, burning smell)
- If the refrigerator stops cooling properly
Next step
Choose the next step for LOPO
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Cord
Supplies mains power to the appliance and includes the model-specific plug and terminal connection.
- Typical part-only price
- $15 - $70
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does LOPO error mean on Sharp Refrigerator?
The LOPO error indicates a low temperature condition, possibly linked to voltage irregularities.
Can I fix Sharp Refrigerator LOPO error myself?
Yes, check the power supply, try a different outlet, and reset the fridge.
How much does it cost to fix LOPO error?
Repair costs vary based on diagnostics and parts needed.
When should I call a technician for LOPO?
Call a technician if the error persists after checks, or if you notice electrical issues like sparks or a burning smell.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!