Sharp Microwave Error EE

⚡ Quick Answer: The Sharp Microwave EE error code signifies a malfunction within the control board or related components. This error can manifest as an unresponsive d... ✅ DIY Fixable

What Does Error EE Mean?

The Sharp Microwave EE error code signifies a malfunction within the control board or related components. This error can manifest as an unresponsive display, halted heating functions, or the code flashing intermittently during operation. Specific underlying issues could include magnetron failure, sensor malfunctions, or circuit problems. To address this, users should try resetting the microwave by unplugging it for 5-10 minutes. If the error persists, professional diagnostics may be necessary to identify and repair the specific fault.

Common Symptoms:

  • Microwave stops operation and displays EE or EE with additional number
  • Heating may stop or not occur
  • Display may flash the code during or after start

Possible Causes

  • Magnetron failure (e.g., EE1, EE2) (medium)
  • Thermistor or temperature sensor failure (e.g., EE6) (medium)
  • Circuit or internal component failure (e.g., EE8) (medium)
  • Fan lock or cooling system error (e.g., EE0) (medium)

How to Fix Error EE

DIY Fix Confirm and reset simple conditions

  1. Turn off and unplug the microwave for 5–10 minutes
  2. Ensure the microwave vents are unobstructed
  3. Plug in and restart to see if the code persists

Technician Only Professional diagnostic and repair

  1. Use service manual to interpret specific EE code digits
  2. Inspect magnetron, thermistors, fans, and internal circuitry
  3. Use multimeter to test component continuity and resistance
  4. Replace failed components and retest system operation

Parts needed: Magnetron, Thermistors/temperature sensors, Cooling fan assembly, Control circuitry

🛑 When to Call a Pro:
  • If EE code persists after reset
  • If microwave does not heat or shows multiple EE faults
  • If unusual noises, smoke, or burning odors accompany the error

Next step

Choose the next step for EE

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Microwave Magnetron

Generates microwave energy for heating food and requires high-voltage service procedures.

Typical part-only price
$80 - $220
DIY difficulty
Hard
Estimated time
60-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

$15 - $35 · Easy · 15-30 mins

Check fit & price
Possible related component

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

$15 - $35 · Easy · 15-30 mins

Check fit & price
Possible related component

Cooling Fan Motor

Moves cooling air around hot cooking components and electronic controls.

$35 - $120 · Medium · 30-75 mins

Check fit & price
Model number required

Model-compatible Microwave parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 1000W
component Control Board
resistance Varies by circuit
part_number FZC-1A
voltage_rating 120V AC

Common Questions

What does EE error mean on Sharp Microwave?

The EE error indicates a malfunction in the control board or related components, affecting operation and display.

Can I fix Sharp Microwave EE error myself?

Yes, you can try resetting the microwave by unplugging it for 5-10 minutes and checking for obstructions.

How much does it cost to fix EE error?

Repair costs for the EE error typically range from $150 to $400+, depending on parts and labor.

When should I call a technician for EE?

Call a technician if the EE code persists after a reset, if there are multiple faults, or if you notice unusual noises or odors.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!