Sharp Microwave Error E13

⚡ Quick Answer: The Sharp Microwave E13 error indicates a potential malfunction in the magnetron, which is responsible for generating heat. Users may notice unusual b... ✅ DIY Fixable

What Does Error E13 Mean?

The Sharp Microwave E13 error indicates a potential malfunction in the magnetron, which is responsible for generating heat. Users may notice unusual buzzing sounds or a complete failure to heat food. To troubleshoot, power off and unplug the microwave for several minutes, ensure the door is fully closed and latched, and check for any visible damage or obstructions inside the cavity.

Possible Causes

  • Magnetron
  • High Voltage Capacitor
  • Control Board

How to Fix Error E13

DIY Fix Check general basic issues

  1. Power off and unplug the microwave for several minutes
  2. Inspect that the door is fully closed and latched
  3. Ensure there are no obvious signs of damage or obstructions in the cavity

Technician Only Diagnose with service tools

  1. Connect service diagnostic tools to retrieve internal error reporting if available
  2. Check control board error registers and wiring harnesses
  3. Verify specific model’s service manual for error code definitions
🛑 When to Call a Pro:
  • If the error persists after power cycle and basic checks, contact Sharp service

Technical Specifications

wattage 1000W
component Magnetron
resistance 0.5-1.5 ohms
part_number F930001
voltage_rating 120V AC

Common Questions

What does E13 error mean on Sharp Microwave?

The E13 error indicates a potential magnetron malfunction, often leading to heating failure.

Can I fix Sharp Microwave E13 error myself?

Yes, you can try basic troubleshooting steps like power cycling and checking the door latch.

How much does it cost to fix E13 error?

Repair costs vary by model and region, so it's best to consult a local technician.

When should I call a technician for E13?

If the error persists after performing basic checks, it's time to contact Sharp service for assistance.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!