Sharp Microwave Error E11

⚡ Quick Answer: The Sharp Microwave error E11 indicates a significant internal fault, typically related to the magnetron or control circuitry. This error often result... ⚠️ Difficulty Varies

What Does Error E11 Mean?

The Sharp Microwave error E11 indicates a significant internal fault, typically related to the magnetron or control circuitry. This error often results in the microwave failing to heat food or starting properly, accompanied by unusual buzzing sounds during operation. It can occur during use or immediately after. Addressing this issue may require professional diagnosis and repair of essential components like the magnetron or control board.

Common Symptoms:

  • Error E11 displayed on control panel
  • Microwave may stop heating or refuse to start
  • Occurs during or immediately after operation

Possible Causes

  • Internal component malfunction (e.g., magnetron or control circuitry) (medium)
  • Convection or heater circuit sensor fault on combination microwave models (medium)

How to Fix Error E11

DIY Fix Basic user checks before service

  1. Turn off and unplug the microwave for several minutes and then plug back in
  2. Ensure the microwave has cooled fully before trying to use again

Technician Only Diagnose and repair internal fault

  1. Inspect key high-voltage and microwave-generating components such as the magnetron, high-voltage diode or capacitor
  2. Check sensor and heater circuits, especially on convection/microwave combination units
  3. Replace failed components or main control board as required

Parts needed: Magnetron, Control board, Thermistor/temperature sensors, Convection heater elements (if applicable)

🛑 When to Call a Pro:
  • Unplug and cease use immediately if E11 persists after power cycling
  • If error appears repeatedly or microwave fails to heat or makes abnormal sounds

Technical Specifications

wattage 1000W
component Magnetron
resistance 0.5-1.5 ohms
part_number SHARP R-21LVF-MAG
voltage_rating 120V AC

Common Questions

What does E11 error mean on Sharp Microwave?

E11 error indicates an internal fault, likely in the magnetron or control circuitry, causing heating failure.

Can I fix Sharp Microwave E11 error myself?

You can try basic checks like power cycling the microwave, but internal faults usually require a technician.

How much does it cost to fix E11 error?

Repairing the E11 error can cost between $100 and $400+, depending on parts and labor.

When should I call a technician for E11?

Call a technician if E11 persists after power cycling or if the microwave shows abnormal sounds or fails to heat.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!