Sharp Microwave Combi Oven Error EE8

⚡ Quick Answer: The EE8 error code on your Sharp microwave combi oven indicates a malfunction in the internal circuitry, often resulting in no heat during operation. ... ✅ DIY Fixable

What Does Error EE8 Mean?

The EE8 error code on your Sharp microwave combi oven indicates a malfunction in the internal circuitry, often resulting in no heat during operation. This circuit failure may prevent the microwave from functioning normally, requiring attention to resolve the issue.

Common Symptoms:

  • Error code EE8 displayed on control panel
  • Microwave stops heating or operating normally
  • Operation may cease until error is cleared or power is cycled

Possible Causes

  • Internal circuit fault detected (medium)

How to Fix Error EE8

DIY Fix Basic checks and power cycle

  1. Turn off the microwave and unplug it from the wall outlet.
  2. Wait 5–10 minutes to allow internal capacitors to discharge.
  3. Plug the microwave back in and power it on to see if EE8 reappears.
  4. Ensure the microwave cavity is empty and the door is fully closed when powering up.

Technician Only Service internal circuitry

  1. Inspect internal control board and connectors for signs of burn, loose wiring, or failure.
  2. Test major internal components (power supply circuits, control board components) with appropriate tools.
  3. Replace faulty circuit board or related electronics as needed based on diagnostic results.

Parts needed: Control board / main PCB, Internal wiring harnesses or connectors

🛑 When to Call a Pro:
  • If EE8 persists after a power cycle
  • If there are unusual noises, burning smells, or visible damage inside the unit
  • If the microwave does not heat or operate normally after basic checks

Technical Specifications

wattage 1000W
component Heating Element
resistance 10-30 ohms
part_number Sharp 2MZ-1-1
voltage_rating 120V AC

Common Questions

What does EE8 error mean on Sharp microwave combi oven?

EE8 indicates a malfunction in the internal circuitry, causing the microwave to stop heating or operating normally.

Can I fix Sharp microwave combi oven EE8 error myself?

Yes, try powering off the microwave, unplugging it, and waiting 5-10 minutes before plugging it back in to see if the error clears.

How much does it cost to fix EE8 error?

Repair costs typically range from $150 to $400+, depending on parts and labor involved.

When should I call a technician for EE8?

Call a technician if the EE8 error persists after a power cycle, or if you notice unusual noises, burning smells, or visible damage.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!