Samsung Wine Cooler Error LO

⚡ Quick Answer: The Samsung wine cooler LO error indicates a low temperature condition, typically displaying 'LO' on the screen. This alarm signals that the internal ... ✅ DIY Fixable

What Does Error LO Mean?

The Samsung wine cooler LO error indicates a low temperature condition, typically displaying 'LO' on the screen. This alarm signals that the internal temperature has fallen below the set range, which may lead to inadequate cooling for your wines. Common causes include a faulty temperature sensor, door seal issues, or poor airflow. Immediate attention is necessary to prevent spoilage.

Common Symptoms:

  • Display shows "Lo"
  • Temperature lower than expected
  • Possible beeping or alarm

Possible Causes

  • Internal temperature below the set range (medium)
  • Faulty temperature sensor or thermostat (low)
  • Door seal or airflow issues causing cold air loss or uneven cooling (low)

How to Fix Error LO

DIY Fix Check temperature settings and real internal temperature

  1. Verify the set temperature on the control panel
  2. Use an independent thermometer placed inside the wine cooler to confirm actual internal temperature
  3. Adjust the set temperature slightly higher if the internal temperature is indeed below set range

DIY Fix Check door seal and unit placement

  1. Inspect the door gasket for damage or debris and clean if necessary
  2. Ensure the wine cooler is level and doors fully close
  3. Remove any blockage to airflow inside and around the unit

Technician Only Test or replace temperature sensor/thermostat

  1. Disconnect power to the unit
  2. Access and test the temperature sensor and thermostat for correct resistance and operation
  3. Replace defective components as needed

Parts needed: Temperature sensor/thermostat

🛑 When to Call a Pro:
  • Persistent alarms after attempting user-level adjustments
  • Visible frost buildup or actual unusually low temperatures compared to set point
  • Suspected electrical or sensor failures beyond simple adjustments

Next step

Choose the next step for LO

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Thermostat

Regulates temperature by turning the heating or cooling system on or off.

$15 - $40 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Wine Cooler parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 100W
component Temperature Sensor
resistance 5-10 ohms
part_number DA32-10105S
voltage_rating 120V AC

Common Questions

What does LO error mean on samsung wine cooler?

The LO error means the internal temperature is below the set range, triggering an alarm.

Can I fix samsung wine cooler LO error myself?

Yes, you can check the temperature settings, door seal, and airflow to troubleshoot.

How much does it cost to fix LO error?

Repair costs range from $30 to $120 for parts, plus potential service fees.

When should I call a technician for LO?

Call a technician if alarms persist, you see frost buildup, or suspect electrical issues.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!