Samsung Washer Dryer Error AE
⚡ Quick Answer: The AE error code on your Samsung washer dryer indicates a communication failure between the main and sub control boards, often leading to the unit be... ✅ DIY Fixable
What Does Error AE Mean?
The AE error code on your Samsung washer dryer indicates a communication failure between the main and sub control boards, often leading to the unit being unresponsive or halting during cycles. Unusual beeping sounds may accompany this error, suggesting potential issues such as loose wiring or moisture on the control boards. Proper diagnosis and inspection of PCB connections are essential to resolve this issue effectively.
Common Symptoms:
- AE code displayed on control panel
- Unit may not respond to button presses
- Cycle doesn’t start or halts immediately
- Possible intermittent operation
Possible Causes
- Communication failure between main PCB and sub (display/control) PCB (medium)
- Loose or poor wiring/harness connection between control boards (medium)
- Moisture or contamination on the control boards causing communication errors (low)
How to Fix Error AE
DIY Fix Power reset and basic check
- Unplug the washer dryer from power for at least 5–10 minutes.
- Ensure the control panel is dry and free of visible moisture.
- Plug the unit back in and attempt to restart a cycle.
Technician Only Inspect and secure PCB connections
- Unplug and open access panels to reach the main PCB and sub/display PCB.
- Inspect ribbon cables and harness connectors between the boards for secure seating and damage.
- Clean any corrosion or contamination from connectors.
- Reassemble and test operation.
Parts needed: Main PCB (control board), Sub/display PCB, Ribbon cables / board harnesses
- If the AE code persists after basic power reset and inspection
- If you see signs of water damage on electronics
- If internal board diagnostics point to a failed PCB
Next step
Choose the next step for AE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does AE error mean on Samsung washer dryer?
AE error indicates a communication failure between internal control boards, causing the unit to be unresponsive.
Can I fix Samsung washer dryer AE error myself?
Yes, try a power reset by unplugging the unit for 5–10 minutes and checking for moisture on the control panel.
How much does it cost to fix AE error?
Repair costs for the AE error typically range from $100 to $300+, depending on part replacements.
When should I call a technician for AE?
Call a technician if the AE code persists after a reset or if there are signs of water damage on the electronics.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!