Samsung Freezer Error 1E

⚡ Quick Answer: The Samsung freezer error code 1E indicates a malfunction in the temperature sensor, often leading to erratic cooling and temperature inconsistencies.... ✅ DIY Fixable

What Does Error 1E Mean?

The Samsung freezer error code 1E indicates a malfunction in the temperature sensor, often leading to erratic cooling and temperature inconsistencies. This error typically arises from an open circuit condition within the sensor or damaged wiring that connects the sensor to the control board. If the error persists after power interruptions, it may require inspection and potential replacement of the temperature sensor.

Common Symptoms:

  • 1E or IE displayed on freezer panel
  • Cooling may stop or be erratic if sensor fault persists
  • Error often appears after power interruption

Possible Causes

  • Open or faulty freezer temperature sensor (medium)
  • Damaged or loose wiring/connectors between sensor and control board (medium)

How to Fix Error 1E

DIY Fix Basic reset and observation

  1. Unplug the freezer from power or switch off the breaker for 5–10 minutes.
  2. Restore power and check if the 1E code clears.
  3. If your model has a control panel reset sequence, try holding the designated buttons (e.g., Power Freeze/Power Cool or panel buttons) to clear false errors.

Technician Only Inspect and service freezer temperature sensor circuit

  1. Access the freezer compartment and locate the evaporator/freezer temperature sensor.
  2. Visually inspect the sensor, wiring harness, and connectors for damage, corrosion, or disconnection.
  3. Use a multimeter to measure sensor resistance and confirm if it’s within expected range (model-specific).
  4. Replace the sensor if it’s open/shorted or out of specification.
  5. Verify proper seating of connectors and integrity of harness to the main control board.

Parts needed: Freezer temperature sensor, Wiring harness/connectors

🛑 When to Call a Pro:
  • Error persists after reset and basic troubleshooting
  • Visible wiring damage inside the unit
  • Sensor replacement does not resolve the error

Technical Specifications

wattage
component Temperature Sensor
resistance 5k-10k ohms
part_number DA32-10105W
voltage_rating 120V AC

Common Questions

What does 1E error mean on samsung freezer?

The 1E error indicates a malfunction in the temperature sensor, causing erratic cooling.

Can I fix samsung freezer 1E error myself?

Yes, you can perform a basic reset by unplugging the freezer for 5–10 minutes.

How much does it cost to fix 1E error?

Repair costs for the 1E error can be medium, depending on parts and labor in your area.

When should I call a technician for 1E?

Call a technician if the error persists after a reset or if there is visible wiring damage.

Sources & References

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!