Samsung Dryer Error tS

⚡ Quick Answer: The Samsung Dryer error code tS indicates a thermistor failure, signaling an issue with the temperature sensing circuit. This error often results in t... ✅ DIY Fixable

What Does Error tS Mean?

The Samsung Dryer error code tS indicates a thermistor failure, signaling an issue with the temperature sensing circuit. This error often results in the dryer not heating properly and may be accompanied by overheating or premature shutdowns. The thermistor may be reading abnormal values, leading to inadequate drying performance.

Common Symptoms:

  • Dryer displays tS on the control panel during a cycle
  • Overheating or premature shutdown reported in some cases
  • Drying performance issues accompanying the error

Possible Causes

  • Faulty thermistor (temperature sensor) (medium)

How to Fix Error tS

DIY Fix Check and clean airflow pathways

  1. Turn off and unplug the dryer.
  2. Remove and clean the lint filter thoroughly.
  3. Inspect the exhaust vent and hose for lint buildup or kinks and clear any obstruction.
  4. Plug the dryer back in and run a test cycle to see if the tS code persists.

DIY Fix Inspect thermistor wiring connections

  1. Unplug the dryer from power.
  2. Access the thermistor area, typically near the heating element.
  3. Visually inspect the harness and connector for signs of moisture, corrosion, or damage.
  4. Reconnect any loose plugs and secure wiring, then test the dryer.

Technician Only Test and replace thermistor if faulty

  1. Unplug the dryer and remove the panel to access the thermistor.
  2. Use a multimeter to measure thermistor resistance according to the model specifications.
  3. If readings are out of range or inconsistent, replace the thermistor assembly.
  4. Reassemble the dryer and clear the error code via power reset and test.

Parts needed: Replacement thermistor compatible with the specific Samsung dryer model, Screwdrivers and multimeter

🛑 When to Call a Pro:
  • If the tS error persists after cleaning airflow, checking wiring, and basic user-level steps
  • If there are signs of electrical damage (smoke, burning smell) or if internal disassembly is beyond user comfort level
  • If multimeter testing shows ambiguous results and model-specific service data is required

Technical Specifications

wattage 5000W
component Thermistor
resistance 10-15 kOhms
part_number DC32-00007A
voltage_rating 240V AC

Common Questions

What does tS error mean on Samsung Dryer?

The tS error indicates a thermistor failure, affecting temperature sensing and drying performance.

Can I fix Samsung Dryer tS error myself?

Yes, you can check airflow pathways and inspect thermistor wiring connections as initial DIY actions.

How much does it cost to fix tS error?

The estimated cost to fix the tS error ranges from $30 to $120 for parts and labor.

When should I call a technician for tS?

Call a technician if the tS error persists after basic checks or if you notice electrical damage.

Sources & References

Data last verified: 2026-01-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!