Samsung Dryer Error tE
⚡ Quick Answer: The Samsung Dryer tE error signifies a thermistor failure, impacting the dryer's temperature sensing system. This error typically results in insuffici... ✅ DIY Fixable
What Does Error tE Mean?
The Samsung Dryer tE error signifies a thermistor failure, impacting the dryer's temperature sensing system. This error typically results in insufficient heating or complete stoppage of the drying cycle. Symptoms may include the dryer failing to complete its cycle, overheating, or stopping mid-cycle due to temperature regulation issues. Addressing this error often involves inspecting the thermistor, wiring, and airflow restrictions.
Common Symptoms:
- Dryer displays tE error and fails to complete drying cycle
- Dryer may not heat properly or may overheat
- Dryer stops mid-cycle due to temperature regulation fault
Possible Causes
- Faulty thermistor/temperature sensor (medium)
- Loose or damaged wiring between thermistor and control board (medium)
- Restricted airflow (lint filter or vent blockage) (medium)
- Faulty control board (PCB) affecting temperature regulation (low)
How to Fix Error tE
DIY Fix Clean lint filter and vent
- Unplug the dryer before cleaning.
- Remove and clean the lint screen of lint and debris.
- Inspect and clear the dryer vent hose and exterior exhaust vent for blockages.
DIY Fix Power cycle the dryer
- Unplug the dryer from its power source.
- Wait 5–10 minutes.
- Plug it back in and restart the drying cycle to see if the error clears.
Technician Only Inspect and test the thermistor and wiring
- Disconnect power and remove dryer access panels.
- Locate and visually inspect the thermistor and its wiring.
- Use a multimeter to test thermistor resistance at room temperature.
- Check wiring continuity and secure any loose connectors.
Parts needed: Thermistor/temperature sensor, Wiring harness/connectors
Technician Only Control board diagnosis and replacement
- Verify all other causes are ruled out before board replacement.
- Diagnose control board functionality using service diagnostics.
- Replace the main PCB if confirmed faulty.
Parts needed: Main control board (PCB)
- If the error persists after cleaning vents and inspecting connections
- If you are not comfortable testing electrical components
- If a burning smell, smoke, or other signs of electrical damage are present
Next step
Choose the next step for tE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Thermistor |
| resistance | 10-15 kOhms |
| part_number | DC32-00007A |
| voltage_rating | 240V AC |
Common Questions
What does tE error mean on Samsung Dryer?
The tE error indicates a thermistor failure, leading to improper heating and disrupted drying cycles.
Can I fix Samsung Dryer tE error myself?
Yes, you can clean the lint filter and vent, and power cycle the dryer to potentially resolve the issue.
How much does it cost to fix tE error?
Repair costs for the tE error typically range from $30 to $150 for sensor and basic parts.
When should I call a technician for tE?
Call a technician if the error persists after cleaning, if you're uncomfortable testing components, or if you notice signs of electrical damage.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!