Samsung Dryer Error HS

⚡ Quick Answer: HS means Samsung Dryer error HS indicates a malfunction in the heating element, often resulting in no heat during drying cycles. This is typically a DIY fix.

What Does Error HS Mean?

Samsung Dryer error HS indicates a malfunction in the heating element, often resulting in no heat during drying cycles.

Common Causes

  • Heating Element (60% likelihood)
  • Thermal Fuse (30% likelihood)
  • Wiring Issues (10% likelihood)

Troubleshooting Steps

  1. Step 1: Test the Heating Element

    Using a multimeter, check the resistance of the heating element. It should read between 10-30 ohms. If it reads infinite, the element is faulty.

    Ensure the dryer is unplugged before testing.

  2. Step 2: Inspect the Thermal Fuse

    Locate the thermal fuse, usually near the heating element, and test it with a multimeter. If it shows no continuity, replace it.

    A blown thermal fuse is often a sign of overheating.

  3. Step 3: Check Wiring Connections

    Inspect all wiring connected to the heating element and thermal fuse for damage or loose connections. Repair or replace as necessary.

    Look for burnt or frayed wires.

  4. Step 4: Replace the Heating Element

    If the heating element is faulty, remove it by unscrewing it from its mount and disconnecting the wires. Install the new element by reversing the process.

    Make sure to use a compatible replacement part.

  5. Step 5: Reassemble and Test

    Reassemble the dryer, plug it back in, and run a test cycle to ensure proper heating.

    Monitor for any unusual sounds or smells during the test.

How to Reset

This error cannot be reset until the underlying issue is resolved. Once fixed, the error will clear automatically.

Technical Specifications

wattage 5400W
component Heating Element
resistance 10-30 ohms
part_number DC47-00019A
voltage_rating 240V AC

Frequently Asked Questions

Can I replace the heating element myself?

Yes, if you have basic electrical skills and the right tools, you can replace it.

How much does it cost to fix error HS?

The cost can range from $50 to $150 depending on parts and whether you hire a technician.

Why does my dryer show error HS?

Error HS is typically due to a faulty heating element or thermal fuse.

Should I call a professional for error HS?

If you're uncomfortable with electrical repairs or lack tools, it’s best to call a technician.

When should I replace the heating element?

Replace it if testing shows no continuity or if the dryer fails to heat after troubleshooting.

User Comments (0)

Share your experience or solution below.

Be the first to comment!