Samsung Dryer Error HE
⚡ Quick Answer: The Samsung Dryer HE error code indicates a heating system malfunction, preventing the dryer from producing adequate heat during its cycle. This can r... ✅ DIY Fixable
What Does Error HE Mean?
The Samsung Dryer HE error code indicates a heating system malfunction, preventing the dryer from producing adequate heat during its cycle. This can result in clothes remaining damp, an excessively long drying time, or the dryer shutting down due to overheating. Common causes include restricted airflow from a clogged vent or lint filter, a faulty temperature sensor, or a defective heating element. Proper maintenance and troubleshooting can often resolve the issue.
Common Symptoms:
- Dryer stops with HE code displayed
- Clothes not drying due to lack of heat
- Dryer takes excessively long to dry
- Possible overheating or thermal shutdown
Possible Causes
- Restricted airflow/clogged vent or lint filter (medium)
- Faulty temperature sensor/thermistor (medium)
- Faulty heating element or related heating component (medium)
How to Fix Error HE
DIY Fix Check airflow and basic maintenance
- Turn off and unplug the dryer
- Clean the lint filter
- Check and clear the exhaust vent and duct for obstructions
- Ensure proper airflow around the dryer
DIY Fix Reset dryer and re-run cycle
- Unplug the dryer from power for at least 30–60 seconds
- Plug it back in
- Restart a drying cycle to see if the HE error clears
Technician Only Test and replace faulty sensors/thermistor
- Disconnect power and access internal control board/sensor area
- Use multimeter to test thermistor resistance per manufacturer specs
- Replace thermistor if out of range or malfunctioning
Parts needed: Thermistor/temperature sensor
Technician Only Inspect and replace heating element
- Cut power to unit
- Remove dryer panels to access heating assembly
- Test heating element continuity with multimeter
- Replace heating element if open or damaged
Parts needed: Heating element assembly
- If error persists after basic airflow cleaning and reset
- If internal component testing (sensors/heating elements) is needed
- If heater or wiring shows damage or uncertain diagnosis
Next step
Choose the next step for HE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does HE error mean on Samsung Dryer?
The HE error indicates a heating malfunction, causing the dryer to stop and clothes not to dry.
Can I fix Samsung Dryer HE error myself?
Yes, you can check for airflow issues, clean the lint filter, and reset the dryer to potentially resolve the HE error.
How much does it cost to fix HE error?
Repair costs for the HE error can range from $30 to $100, depending on the required parts and service.
When should I call a technician for HE?
Call a technician if the HE error persists after cleaning or resetting, or if internal components need testing.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!