Samsung Dryer Error FC

⚡ Quick Answer: The Samsung dryer FC error code indicates a frequency error, which typically results from an unstable power source detected by the dryer’s internal ... ✅ DIY Fixable

What Does Error FC Mean?

The Samsung dryer FC error code indicates a frequency error, which typically results from an unstable power source detected by the dryer’s internal diagnostics. This can cause the dryer to stop mid-cycle, display the FC code, or refuse to start until the error is cleared. Power cycling the dryer might temporarily resolve the issue, but if the error persists, further investigation into the electrical supply quality is required.

Common Symptoms:

  • Dryer stops mid-cycle and displays FC on the control panel
  • Dryer may refuse to start or resume operation until the error is cleared
  • Error persists despite restarting cycle initially

Possible Causes

  • Invalid power source frequency / unstable electrical supply (medium)
  • Temporary electronic glitch (low)

How to Fix Error FC

DIY Fix Check and Reset the Dryer’s Power Condition

  1. Turn the dryer off and cancel any running cycle.
  2. Unplug the dryer from the outlet (or switch off the dedicated breaker) for at least 1–2 minutes to clear transient errors.
  3. After waiting, restore power and start a new drying cycle to see if the FC code clears.
  4. Ensure the dryer has a dedicated outlet without extension cords and that no major appliances share the circuit.

Technician Only Verify Power Supply Quality and Inspect Electrical Components

  1. Measure the incoming power supply frequency and voltage with appropriate electrical test tools to confirm they are within specification for this dryer model.
  2. Inspect wiring, terminal connections, and the power inlet for signs of loose connections or damage.
  3. If power quality is within specification but FC persists, inspect the main PCB for signs of failure or faults.

Parts needed: Multimeter or power quality tester, Main PCB (if defective)

🛑 When to Call a Pro:
  • If the FC error returns after power cycling and basic checks
  • If power supply measurements are consistently out of spec
  • If there are signs of electrical damage (smoke smell, scorch marks) or other simultaneous errors

Technical Specifications

wattage 500W
component Control Board
resistance N/A
part_number DC92-00282A
voltage_rating 120V AC

Common Questions

What does FC error mean on Samsung dryer?

The FC error indicates a frequency error due to an unstable power source, causing erratic behavior or failure to start.

Can I fix Samsung dryer FC error myself?

Yes, try resetting the dryer by unplugging it for 1-2 minutes and then restarting the cycle to see if the error clears.

How much does it cost to fix FC error?

Repair costs for the FC error range from ¥10,000 to ¥50,000+, depending on parts and labor.

When should I call a technician for FC?

Call a technician if the FC error persists after power cycling, if the power supply is consistently out of spec, or if there are signs of electrical damage.

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!