Samsung Dryer Error Et
⚡ Quick Answer: The Samsung Dryer Et error indicates an internal communication issue, often linked to the control board malfunctioning. This error may cause the dryer... ✅ DIY Fixable
What Does Error Et Mean?
The Samsung Dryer Et error indicates an internal communication issue, often linked to the control board malfunctioning. This error may cause the dryer to stall or not complete its cycle, and it can temporarily be cleared by resetting the power. If the error persists, it may require inspection or repair of the control board and associated wiring.
Common Symptoms:
- Et displayed on dryer digital panel
- Dryer stalls or will not complete cycle
- Resetting power temporarily clears error
Possible Causes
- Internal communication failure/control board issue (medium)
- Timing or dry cycle logic misread (low)
How to Fix Error Et
DIY Fix Basic reset and checks
- Unplug the dryer from power for 1–5 minutes to reset the control board.
- After waiting, plug the dryer back in and attempt a dry cycle.
- Ensure lint filter is clean before testing to rule out unrelated airflow issues.
Technician Only Inspect and repair internal control board and wiring
- Disconnect power to dryer and open control panel.
- Visually inspect main control board for burn marks, corrosion, or loose connectors.
- Check wiring harnesses between control board and key sensors/components for continuity or damage.
- Replace control board if diagnostics confirm failure or persistent Et error after reset and wiring check.
Parts needed: Main control board/PCB, Wiring harnesses and connectors
- If Et error persists after reset and basic checks
- If control board shows signs of physical damage
- If you are uncomfortable working with internal electronics
Next step
Choose the next step for Et
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does Et error mean on Samsung Dryer?
Et error signifies an internal communication failure, often related to the control board, causing the dryer to stall.
Can I fix Samsung Dryer Et error myself?
Yes, you can attempt a basic reset by unplugging the dryer for 1–5 minutes and ensuring the lint filter is clean.
How much does it cost to fix Et error?
Repair costs for the Et error typically range from $200 to $500, depending on parts and labor.
When should I call a technician for Et?
Call a technician if the Et error persists after a reset, if there's physical damage to the control board, or if you're uncomfortable with internal repairs.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!