Samsung Dryer Error CE

⚡ Quick Answer: CE means Samsung Dryer error CE indicates a control board malfunction, often resulting in unusual beeping sounds and failure to s... This is typically a DIY fix.

What Does Error CE Mean?

Samsung Dryer error CE indicates a control board malfunction, often resulting in unusual beeping sounds and failure to start.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Open the dryer’s back panel to access the control board. Look for burnt components or visible damage.

    Check for any signs of overheating.

  2. Step 2: Test Voltage Supply

    Using a multimeter, check the voltage supply to the control board. Ensure it matches the specifications.

    If voltage is absent, trace back to the power source.

  3. Step 3: Check Wiring Connections

    Inspect all wiring connections to the control board for loose or damaged wires. Secure any loose connections.

    Tight connections can prevent signal issues.

  4. Step 4: Replace the Control Board

    If damage is confirmed, replace the control board with a new one. Ensure all connectors are properly attached.

    Use a compatible part number for replacement.

  5. Step 5: Test the Dryer

    Reassemble the dryer and run a test cycle to ensure the error code is cleared and the dryer operates normally.

    Monitor for any unusual sounds during operation.

How to Reset

To reset the CE error, unplug the dryer for 10 minutes, then plug it back in and attempt to start a new cycle.

Technical Specifications

wattage 5000W
component Control Board
resistance N/A
part_number DC92-00282A
voltage_rating 240V AC

Frequently Asked Questions

Can I fix the CE error myself?

Yes, if you have basic electrical knowledge and the right tools.

How much does it cost to replace the control board?

Replacement control boards typically range from $100 to $300, depending on the model.

What causes the CE error in Samsung dryers?

The CE error is often caused by a malfunctioning control board due to power surges or component failure.

Should I call a professional for the CE error?

If you're uncomfortable with electrical components or lack tools, it's best to call a professional.

When should I consider replacing my dryer?

If the CE error persists after replacing the control board, it may indicate deeper issues.

User Comments (0)

Share your experience or solution below.

Be the first to comment!