Samsung Dryer Error C1

⚡ Quick Answer: C1 means samsung dryer error C1 indicates a communication failure between the control board and the user interface, often resulti... This is typically a DIY fix.

What Does Error C1 Mean?

samsung dryer error C1 indicates a communication failure between the control board and the user interface, often resulting in unresponsive buttons or erratic display behavior.

Common Causes

  • Control Board (50% likelihood)
  • User Interface Board (30% likelihood)
  • Wiring Issues (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect Wiring Connections

    Open the dryer panel to access the control board. Check all wiring connections for looseness or damage. Secure any loose wires and replace damaged ones.

    Ensure connections are tight to avoid future issues.

  2. Step 2: Test the Control Board

    Using a multimeter, check for continuity in the control board. If there is no continuity, the control board may need replacement.

    Refer to the service manual for specific testing points.

  3. Step 3: Examine User Interface Board

    Remove the user interface board and inspect for any signs of damage or burnt components. Replace if necessary.

    This board can often be tested with a multimeter as well.

  4. Step 4: Reassemble and Test

    After addressing any issues, reassemble the dryer and power it on to see if the error code persists.

    Keep an eye on the display for any unusual behavior.

How to Reset

To reset the samsung dryer error C1, unplug the dryer for at least 10 minutes, then plug it back in and check if the error persists.

Technical Specifications

wattage 5000W
component Control Board
resistance 10-20 ohms
part_number DC92-00282A
voltage_rating 240V AC

Frequently Asked Questions

Can I fix the samsung dryer error C1 myself?

Yes, if you have basic electrical knowledge and the right tools, you can troubleshoot and potentially fix the issue.

How much does it cost to repair the control board?

Repair costs can vary, but replacing a control board typically ranges from $100 to $300, depending on the model.

What causes the samsung dryer error C1 to appear?

This error is often caused by a malfunctioning control board or user interface board, or issues with wiring connections.

Should I replace the control board or try to repair it?

If the control board shows signs of damage or failure, replacement is usually more reliable than attempting a repair.

When should I call a professional for error C1?

If you are uncomfortable with electrical components or the issue persists after troubleshooting, it's best to consult a professional.

User Comments (0)

Share your experience or solution below.

Be the first to comment!