Samsung Dryer Error bE

⚡ Quick Answer: The Samsung Dryer error code bE indicates a Button Error, which occurs when a control panel button is detected as stuck or continuously pressed. This ... ✅ DIY Fixable

What Does Error bE Mean?

The Samsung Dryer error code bE indicates a Button Error, which occurs when a control panel button is detected as stuck or continuously pressed. This issue often prevents the dryer from starting or responding to button presses, and users may notice unresponsive buttons on the control panel. To resolve this, inspect and free any stuck buttons or reset the dryer electronics. If the error persists, further inspection of the control panel or user interface may be necessary.

Common Symptoms:

  • Error code bE displayed on the control panel
  • Dryer does not start or respond to button presses
  • Buttons on the control panel appear unresponsive or mechanically stuck

Possible Causes

  • Stuck or continuously pressed button on the control panel (high)
  • Faulty control panel / user interface electrical issue (medium)

How to Fix Error bE

DIY Fix Inspect and free stuck buttons

  1. Power off and unplug the dryer.
  2. Gently press each control panel button to see if any are stuck or unresponsive.
  3. If a button feels stuck, gently work it free or clean around the button with a soft brush or cotton swab.
  4. Ensure the control panel surface is clean and dry.
  5. Restore power and test if the error clears.

DIY Fix Reset the dryer electronics

  1. Unplug the dryer from the power outlet.
  2. Wait about 30 seconds to 1 minute.
  3. Plug the dryer back in and attempt to restart a cycle.

Technician Only Inspect and replace control panel or user interface board

  1. With power disconnected, access the dryer’s control panel assembly.
  2. Test button switches and user interface circuitry for continuity.
  3. Replace the control panel or interface board if faulty components are identified.
  4. Reassemble and test the dryer.

Parts needed: Control panel / user interface board, Button switches (if discrete)

🛑 When to Call a Pro:
  • The error persists after clearing and cleaning buttons and resetting the dryer.
  • Buttons are physically damaged, unresponsive, or the error recurs intermittently.
  • Signs of moisture damage or electrical shorts around the control panel.

Technical Specifications

wattage 5000W
component Belt assembly
resistance N/A
part_number DC97-07509A
voltage_rating 240V AC

Common Questions

What does bE error mean on Samsung Dryer?

The bE error indicates a Button Error, signifying a stuck or continuously pressed button on the control panel.

Can I fix Samsung Dryer bE error myself?

Yes, you can inspect and free stuck buttons, and reset the dryer electronics to resolve the bE error.

How much does it cost to fix bE error?

The estimated repair cost for the bE error ranges from ¥10,000 to ¥40,000, depending on parts and labor.

When should I call a technician for bE?

Call a technician if the error persists after cleaning buttons, if buttons are damaged, or if there are signs of moisture or electrical issues.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!