Samsung Dryer Error AE
⚡ Quick Answer: The Samsung Dryer AE error code indicates an internal communication failure between the main PCB and the inverter or sub-PCB. This issue often results... ✅ DIY Fixable
What Does Error AE Mean?
The Samsung Dryer AE error code indicates an internal communication failure between the main PCB and the inverter or sub-PCB. This issue often results in the dryer halting operation, displaying the AE code, and may cause a lack of heat during drying cycles, as well as unusual sounds from the fan. To resolve the issue, basic user checks can be performed, such as resetting the dryer. If the error persists, further inspection of the control electronics and wiring is necessary.
Common Symptoms:
- Dryer halts operation and displays AE code
- Dryer may be unresponsive or locked out until error is cleared
Possible Causes
- Internal communication failure between main PCB and inverter or sub‑PCB (high)
- Loose or faulty wiring/connector between control boards (medium)
- Defective main or sub PCB (medium)
How to Fix Error AE
DIY Fix Basic user checks and reset
- Turn off and unplug dryer from power outlet
- Wait at least 30 seconds then reconnect power
- Restart the dryer to see if error clears
- Ensure dryer door is fully closed and latch engaged
Technician Only Inspect control electronics, wiring and PCBs
- Disconnect power and open rear/service panel
- Visually inspect wiring harnesses between main PCB and inverter/sub PCBs for loose connectors or damage
- Reseat connectors and check for corrosion or bent pins
- Test continuity of communication bus lines if schematic available
- Replace faulty main PCB or sub PCB if confirmed defective
Parts needed: Main PCB, Inverter/sub PCB, Wire harness/connectors
- If basic reset and user checks do not clear AE error
- If wiring inspection reveals burn marks, damaged harnesses, or unpredictable behavior
- If PCBs require replacement and you are not qualified
Next step
Choose the next step for AE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Temperature Sensor |
| resistance | 10-30 ohms |
| part_number | DC32-00007A |
| voltage_rating | 240V AC |
Common Questions
What does AE error mean on Samsung Dryer?
The AE error indicates an internal communication failure between the main PCB and the inverter or sub-PCB.
Can I fix Samsung Dryer AE error myself?
Yes, you can try resetting the dryer by unplugging it for 30 seconds and then reconnecting it.
How much does it cost to fix AE error?
The estimated repair cost ranges from $150 to $450, depending on parts and labor.
When should I call a technician for AE?
Call a technician if the reset does not clear the error or if you notice damaged wiring or require PCB replacement.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!