Samsung Dryer Error 1TC

⚡ Quick Answer: 1TC means samsung dryer error 1TC indicates a malfunction in the thermistor, which may cause the dryer to overheat or not heat at ... This is typically a DIY fix.

What Does Error 1TC Mean?

samsung dryer error 1TC indicates a malfunction in the thermistor, which may cause the dryer to overheat or not heat at all.

Common Causes

  • Thermistor (60% likelihood)

Troubleshooting Steps

  1. Step 1: Test the Thermistor

    Using a multimeter, measure the resistance of the thermistor. It should read between 10k to 15k ohms at room temperature. If the reading is outside this range, the thermistor is faulty.

    Ensure the dryer is unplugged before accessing the thermistor.

  2. Step 2: Locate the Thermistor

    Remove the back panel of the dryer to access the thermistor. It is typically located near the heating element.

    Keep screws organized for easy reassembly.

  3. Step 3: Replace the Thermistor

    If the thermistor is faulty, disconnect the wires and remove it from its housing. Install the new thermistor by reversing the removal process.

    Use wire cutters if the old thermistor's wires are damaged.

  4. Step 4: Reassemble the Dryer

    Once the new thermistor is installed, reattach the back panel and secure it with screws.

    Double-check all connections before plugging the dryer back in.

  5. Step 5: Test the Dryer

    Plug the dryer back in and run a test cycle to ensure it heats properly and the error code does not reappear.

    Monitor for any unusual sounds or smells during the test.

How to Reset

To reset the error code, unplug the dryer for 10 minutes and then plug it back in. If the error persists, further diagnosis is needed.

Technical Specifications

wattage 5000W
component Thermistor
resistance 10-15 kΩ
part_number DC32-00007A
voltage_rating 240V AC

Frequently Asked Questions

Can I replace the thermistor myself?

Yes, if you have basic tools and follow safety precautions, you can replace the thermistor.

How much does a new thermistor cost?

A new thermistor typically costs between $20 to $50, depending on the model.

What causes the thermistor to fail?

Thermistors can fail due to overheating, electrical surges, or age-related wear.

Should I call a professional if the error persists?

Yes, if the error continues after replacing the thermistor, there may be a deeper electrical issue.

When should I consider replacing my dryer?

If multiple components fail frequently or the repair costs exceed half the price of a new dryer, consider replacement.

User Comments (0)

Share your experience or solution below.

Be the first to comment!