Russell Hobbs Microwave Error E01

⚡ Quick Answer: The E01 error code on your Russell Hobbs microwave indicates a potential issue with the door interlock switch. This can prevent the microwave from sta... ✅ DIY Fixable

What Does Error E01 Mean?

The E01 error code on your Russell Hobbs microwave indicates a potential issue with the door interlock switch. This can prevent the microwave from starting, often accompanied by unusual buzzing sounds or failure to heat food properly. Checking the door's alignment and latch can help identify the problem.

Common Symptoms:

  • Microwave will not start and displays an error code.

Possible Causes

  • Door interlock switch or latch issue (community repair guide for 'E1', possibly analogous) (low)

How to Fix Error E01

DIY Fix Basic checks before service

  1. Unplug the microwave from power.
  2. Inspect that the door closes fully and latches correctly.
  3. Check for visible misalignment of the door or damage to the latch.

Technician Only Inspect / Replace Door Interlock Switch Components

  1. With power disconnected, remove microwave outer cover.
  2. Test continuity of the primary and secondary door interlock switches.
  3. Inspect door latch mechanism alignment and wiring harness integrity.
  4. Replace any defective door switches or realign/repair the latch assembly.

Parts needed: Door interlock switches, Door latch hardware, Wiring harness

🛑 When to Call a Pro:
  • If basic user‑level checks do not change the condition.
  • If the door mechanism or interlock switches are suspected to be faulty.

Next step

Choose the next step for E01

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Door or Lid Switch

Detects whether the appliance door or lid is safely closed before operation.

Typical part-only price
$15 - $55
DIY difficulty
Medium
Estimated time
20-45 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 800W
component Magnetron
resistance 0-1 ohms
part_number RHM2000-01
voltage_rating 120V AC

Common Questions

What does E01 error mean on russell hobbs microwave?

The E01 error indicates a malfunction typically related to the door interlock switch, preventing the microwave from starting.

Can I fix russell hobbs microwave E01 error myself?

Yes, you can perform basic checks like ensuring the door closes and latches properly.

How much does it cost to fix E01 error?

Repair costs range from ¥5,000 to ¥20,000+, depending on parts and labor.

When should I call a technician for E01?

Call a technician if user-level checks do not resolve the issue or if the door mechanism appears faulty.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!