Panasonic Washing Machine Error U35

⚡ Quick Answer: The Panasonic Washing Machine error U35 indicates an issue with the drum's rotation speed, often leading to the machine stopping mid-cycle. This can b... ✅ DIY Fixable

What Does Error U35 Mean?

The Panasonic Washing Machine error U35 indicates an issue with the drum's rotation speed, often leading to the machine stopping mid-cycle. This can be caused by an imbalance in the load or foreign objects obstructing the drum. Symptoms include loud noises during operation and abnormal spinning behavior. Addressing these factors may help resolve the error.

Common Symptoms:

  • Machine stops mid‑cycle with U35 displayed
  • Loud noise during operation when error occurs
  • Drum not spinning normally or uneven rotation

Possible Causes

  • Abnormal drum rotation / balance issue (low)
  • Foreign object or load imbalance interfering with rotation (low)

How to Fix Error U35

DIY Fix Check laundry load balance and obstructions

  1. Turn off the washing machine and unplug it.
  2. Open the drum and remove laundry.
  3. Check for any foreign objects (coins, buttons, etc.) inside the drum and remove them.
  4. Redistribute laundry evenly in the drum.
  5. Restart the machine to see if the error clears.

Technician Only Inspect drive system and sensors

  1. Test drum rotation under no load to confirm sensor readings and motor operation.
  2. Check drum bearings and suspension for wear or mechanical obstruction.
  3. Verify rotation speed sensor and associated wiring/connectors for correct operation.
  4. Replace faulty components as identified (motor, bearings, sensors).

Parts needed: Drive motor, Rotation speed sensor, Drum bearings

🛑 When to Call a Pro:
  • If the error recurs after balancing the load and removing obstructions
  • If unusual noises persist during drum rotation
  • If the technician inspection identifies worn or damaged internal components

Next step

Choose the next step for U35

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drive Motor

Drives the drum, agitator, or pump to rotate during cycles.

Typical part-only price
$90 - $220
DIY difficulty
Hard
Estimated time
45-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drum Bearing Kit

Supports the spinning drum and ensures smooth, quiet rotation during cycles.

$40 - $95 · Hard · 120-180 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance N/A
part_number N/A
voltage_rating 120V AC

Common Questions

What does U35 error mean on Panasonic Washing Machine?

U35 indicates an issue with drum rotation speed, causing the machine to stop mid-cycle.

Can I fix Panasonic Washing Machine U35 error myself?

Yes, check for load balance and remove any foreign objects from the drum.

How much does it cost to fix U35 error?

Estimated repair costs range from ¥10,000 to ¥40,000+, depending on parts and labor.

When should I call a technician for U35?

Call a technician if the error persists after balancing the load or if unusual noises continue.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!